Page 2 - Visit the webshop at:
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best fr...
Page 3 - CONTENTS
CONTENTS 4 Safety information 8 Product description 9 Before first use 10 Control panel 12 Daily use 14 Clock functions 16 Automatic programmes 18 Using the accessories 20 Additional functions 22 Care and cleaning 26 What to do if… 27 Installation 29 Environment concerns The following symbols are us...
Page 4 - Children and vulnerable people safety
SAFETY INFORMATION Before the installation and use, read this manual carefully:• For your personal safety and the safety of your property• For the respect of the environment• For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. Th...
Page 8 - PRODUCT DESCRIPTION; General overview; Wire shelf
PRODUCT DESCRIPTION General overview 5 34 7 2 1 6 1 Control panel 2 Electronic programmer 3 Grill 4 Oven lamp 5 Fan 6 Rating plate 7 Socket for the core temperature sensor Oven accessories • Wire shelf For cookware, cake tins, roasts. • Deep roasting pan To bake and roast or as pan to collect fat. •...
Page 9 - BEFORE FIRST USE; Initial Cleaning
BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance.• Clean the appliance before first use.Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the di...
Page 10 - CONTROL PANEL; Electronic programmer; Use the sensor fields to operate the appliance.; Control panel
CONTROL PANEL Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field Function Description 1 - DISPLAY Shows the current settings of the appliance. 2 ON/OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme. Strai...
Page 11 - Heat up indicator
Display 6 1 2 3 5 4 7 1 Oven function symbol 2 Temperature/Time display 3 Clock/Residual heat display (also Minute minder and Time of day) 4 Residual heat indicator 5 Indicators for the clock functions (refer to the table "Clock functions") 6 Heat up indicator 7 Number of oven function/progr...
Page 12 - Residual heat indicator; DAILY USE; manual mode; Setting the oven function
Residual heat indicator Display shows the residual heat indicator (residual heat symbol) after end of every cooking sessions when the temperature inside oven cavity is more then 40°C. Display also shows the oven temperature. DAILY USE WARNING! Refer to "Safety information" chapter. To operat...
Page 13 - Changing the oven temperature; Activating the fast heat up function; Error code
Oven function Application 8 Keep Warm To keep the food warm. The set temperature is 80 °C and you cannot change it. 9 Defrost To defrost frozen food. The set temperature is 30 °C and you cannot change it. 10 Bottom Heat To bake cakes with a crispy base, and to preserve food. 11 Pyro Cleaning For aut...
Page 14 - Energy saving; Oven lamp off; CLOCK FUNCTIONS; Count Up Timer; Reset the Count Up Timer:; Setting the DURATION
Energy saving The appliance has same features that help you save energy during everyday cooking: • Residual heat: – the oven function or programme operates: the heating elements are deactivated 10% time earlier (the lamp and fan continue to operate). The condition: the cooking time is longer then 30...
Page 16 - Setting the MINUTE MINDER; AUTOMATIC PROGRAMMES; There are three types of automatic programmes:; Automatic recipes
Setting the MINUTE MINDER Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This function has no effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the appliance is off.1. Touch . and "00" flash in the display. 2. Use or to set MINUTE MINDER. F...
Page 17 - Using My Favourite Programme function:
2. Touch or to set the weight programme (refer to "Recipe book"). The display shows: cooking time, duration symbol , a default weight, a unit of measurement (kg, g). 3. Touch or the settings save automatically after five seconds. 4. The appliance starts. A symbol of the weight unit flashes i...
Page 18 - USING THE ACCESSORIES; The core temperature sensor; There are two temperatures to set:
USING THE ACCESSORIES WARNING! Refer to "Safety information" chapter. The core temperature sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the cooking programme deactivates. There are two temperatures to set: • The oven t...
Page 19 - Telescopic runners; Pull out the right and left hand tele-
7. When the meat is at the set core temperature, the core temperature and flash. The appliance deactivates. An acoustic signal sounds for two minutes.Touch on/off sensor field to deactivate the acoustic signal. WARNING! Be careful when you remove the core temperature sensor. The core temperature sen...
Page 20 - ADDITIONAL FUNCTIONS; Child safety; Loc; Settings menu
2. Put the oven shelf on the telescopic runners and carefully push them in the appliance.Make sure you push back the telescopic runners fully in the appliance before you close the oven door. CAUTION! Do not clean the telescopic runners in the dishwasher. Do not lubricate the telescopic runners. ADDI...
Page 21 - Brightness of the display; There are two modes of display's brightness:
tings (from SET1 to SET8). The number of the settings is different for different models. Look into the table below to see the possible value of each setting. Settings menu Indicator of the setting menu Description Value to set SET1 SET+GO ON/OFF SET2 RESIDUAL HEAT INDICATOR ON/OFF SET3 CLEANING REMI...
Page 22 - Cooling fan; CARE AND CLEANING; Cleaning the door gasket; Stainless steel or aluminium appliances:; Pyrolytic cleaning
• Day brightness: – when the appliance is on;– if you touch any of the sensor fields during night brightness (apart from ON/OFF), the display goes back to day brightness mode for next 10 seconds; – if the appliance is off and you set the minute minder. When the minute minder func- tion ends, the dis...
Page 23 - The pyrolytic cleaning procedure cannot start:; The cleaning reminder goes off from the display:; Telescopic shelf runners
The pyrolytic cleaning procedure cannot start: – If you do not remove the core temperature sensor plug from the socket, the display shows „C2“ – If you do not close the oven door correctly, the display shows „C3“.2. Remove the worst of the residual dirt manually. 3. Set the Pyrolytic cleaning functi...
Page 24 - Oven lamp; Before you change the oven lamp:; Cleaning the oven door
2. Pull the telescopic runners from the rear side of the wall and remove the tele- scopic runners. Installing the telescopic runners Install the telescopic runners in the opposite sequence.The retaining pins on the telescopic shelf runners must point to the front! CAUTION! Do not clean the telescopi...
Page 25 - Inserting the glass panels; Make sure you put the glass panels back in the correct order.
Removing the glass panels 1 2 3 4 Inserting the glass panels After the cleaning, install the panels of glass in the opposite sequence.The oven door is not reversible. BP7714000M BP7614000M Make sure you put the glass panels back in the correct order. Care and cleaning 25
Page 26 - WHAT TO DO IF...; What to do if...
First glass panel has a black frame, the second a small dot on a upper right corner and the third one has no marking. Refer to the illustration. When you assemble the panel with the black frame, make sure that the screen - printing (you can feel a roughness) on this panel faces the oven. Make sure t...
Page 27 - front frame of the oven cavity.; INSTALLATION; Installation
Problem Possible cause Solution The oven lamp does not oper- ate The oven lamp is defective Replace the oven lamp. The display shows C2 You want to start the Pyrolytic cleaning, Keep warm or Defrost function but you did not re- move core temperature sensor plug from the socket. Remove the core tempe...
Page 28 - Building In; Overall oven dimensions; In column building-in; Building-in under kitchen counter; Spacers removed
Building In Overall oven dimensions 1 Removable spacers In column building-in Spacers removed min. 550 560-570 580 50 Spacers not removed 550 min 560-570 590 50 Building-in under kitchen counter Spacers removed min. 550 560-570 593 80-100 Spacers not removed 550 min. 560-570 80-100 600 540 20 560 59...
Page 29 - Securing the appliance to the cabinet; Electrical installation; This appliance is only supplied with a main cable.; ENVIRONMENT CONCERNS; Environment concerns
Securing the appliance to the cabinet Electrical installation The manufacturer is not responsible if you do not obey the safety precautions from chapter "Safety". This appliance is only supplied with a main cable. Applicable types of cables for Europe:• Minimum size Cable/flex: 1,5mm²• Cable...
