Page 3 - CONTENTS
CONTENTS 4 Safety information 7 Product description 9 Before first use 10 Control panel 12 Daily use 14 Clock functions 16 Automatic programmes 17 Using the accessories 19 Additional functions 22 Care and cleaning 25 What to do if… 26 Environment concerns 27 Installation 29 Guarantee/Customer Servic...
Page 4 - Children and vulnerable people safety
SAFETY INFORMATION Before the installation and use, read this manual carefully:• For your personal safety and the safety of your property• For the respect of the environment• For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. Th...
Page 7 - PRODUCT DESCRIPTION; General overview
Oven lamp • The type of light bulb or halogen lamp used for this appliance is only for household ap- pliances. Do not use it for house lighting. • If it becomes necessary to replace the lamp, use one of the same power and specifically designed for household appliances only. • Disconnect the applianc...
Page 8 - Accessories; Wire shelf
1 Control panel 2 Electronic programmer 3 Socket for the core temperature sensor 4 Heating element 5 Oven lamp 6 Fan 7 Rear wall heating element 8 Bottom heat 9 Shelf support, removable 10 Shelf positions Accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits....
Page 9 - Core Temperature Sensor; BEFORE FIRST USE; Initial Cleaning; Setting the time of day:
• Core Temperature Sensor To measure how far the food is cooked. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance.• Clean the appliance before first use.Refer to chapter "Care and Cleaning". First connection to th...
Page 10 - CONTROL PANEL; Electronic programmer; Use the sensor fields to operate the appliance.; Control panel
CONTROL PANEL Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field Function Description 1 - DISPLAY Shows the current settings of the appliance. 2 ON/OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme. Strai...
Page 11 - Heat up indicator
Display 6 1 2 3 5 4 7 1 Oven function symbol 2 Temperature/Time display 3 Clock/Residual heat display (also Minute minder and Time of day) 4 Residual heat indicator 5 Indicators for the clock functions (refer to the table "Clock functions") 6 Heat up indicator 7 Number of oven function/progr...
Page 12 - DAILY USE; manual mode; Setting the oven function
DAILY USE WARNING! Refer to "Safety information" chapter. To operate the appliance you can use:• manual mode - to set an oven function, the temperature and the cooking time manually. • automatic programmes - to prepare a dish when you do not have a knowledge or expe- rience in cooking. Setti...
Page 13 - Changing the oven temperature; Activating the fast heat up function
Oven function Application 11 Bottom Heat To bake cakes with a crispy base, and to preserve food. 12 ECO Roasting ECO functions let you to optimize the energy consumption during cooking. Thus it is necessary to set the cooking time first. To get more information about the recommended set- tings, refe...
Page 14 - Energy saving; Oven lamp off; CLOCK FUNCTIONS; Count Up Timer; Reset the Count Up Timer:; Setting the DURATION
Energy saving The appliance has some features that help you save energy during everyday cooking: • Residual heat: – the oven function or programme operates: the heating elements are deactivated 10% time earlier (the lamp and fan continue to operate). The condition: the cooking time is longer then 30...
Page 15 - Setting the END
2. Touch again and again until the dis- play shows . flashes in the display. 3. Use or to set minutes for DURA- TION. 4. Touch to confirm 5. Use or to set hours for DURATION. If you touch or during setting hours for DURATION, the appliance goes to setting of the END function.6. When the set time end...
Page 16 - AUTOMATIC PROGRAMMES; There are three types of automatic programmes:; Automatic recipes; Setting an automatic recipe:
function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time. Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then EN...
Page 17 - USING THE ACCESSORIES; The core temperature sensor; There are two temperatures to set:
2. Touch or to choose the automatic recipes. 3. Touch or the automatic recipe activates automatically after five seconds. 4. When set time ends, an acoustic signal operates for two minutes. Symbol flashes.The appliance deactivates. 5. Touch any sensor field or open the oven door to stop an acoustic ...
Page 19 - Installing the Oven Accessories; Installing the wire shelf and the deep pan to-; ADDITIONAL FUNCTIONS; My Favourite Programme function
When you put the core temperature sensor into the socket, you cancel the settings for the clock functions. When you cook with the core temperature sensor, you can change the temperature shown in the Temperature/Time display. After you put the core temperature sensor in the socket and set an oven fun...
Page 20 - Child Lock; Activating and deactivating the Child Lock function:; Control lock; Activating/deactivating the control lock function:
1. Set the temperature and time for an oven function or programme. 2. Touch and hold for more than three seconds.An acoustic signal sounds. 3. Deactivate the appliance. Using My Favourite Programme function: • To activate the function touch . The appliance activates your favourite programme. • To de...
Page 21 - Activate the Settings menu:; Automatic switch; There are two modes of display's brightness:
Indicator of the setting menu Description Value to set SET2 RESIDUAL HEAT INDICATOR ON/OFF SET3 CLEANING REMINDER ON/OFF SET4 KEY TONE CLICK/BEEP/OFF SET5 FAULTY TONE ON/OFF SET6 SERVICE MENU --- SET7 RESTORE SETTINGS YES/NO SET8 1) TIME EXTENSION ON/OFF 1) Selected models only You can set the setti...
Page 22 - Cooling fan; CARE AND CLEANING; Pyrolytic cleaning; The pyrolytic cleaning procedure cannot start:
– when the appliance is on;– if you touch any of the sensor fields during night brightness (apart from ON/OFF), the display goes back to day brightness mode for next 10 seconds; – if the appliance is off and you set the minute minder. When the minute minder func- tion ends, the display goes back to ...
Page 23 - The cleaning reminder goes off from the display:; Shelf support; Removing the shelf support; Oven lamp
You can use the End function to delay start of the cleaning process. During the Pyro cleaning the door is locked. The symbol and the bars of the heat indica- tor come up, until the door unlocks again. The door unlocks when temperature inside the oven is under safety condition and Pyro cleaning is fi...
Page 24 - Door and glass panels; Removing the door
Before you change the oven lamp: • Deactivate the appliance.• Remove the fuses from the fuse box or deactivate the circuit breaker. CAUTION! Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. Replacing the oven lamp: 1. You can find...
Page 25 - WHAT TO DO IF...
2. Hold the door trim (B) on the top edge of the door at the two sides and push inwards to release the clip seal. 3. Pull the door trim to the front to re- move it. 4. Hold the door glass panels on their top edge one by one and pull them up out of the guide 5. Clean the door glass panels. To install...
Page 26 - front frame of the appliance cavity.; ENVIRONMENT CONCERNS; you purchased the product.
Problem Possible cause Solution The display shows C2 You want to start the pyrolytic cleaning, keep warm or defrost function but you did not re- move core temperature sensor plug from the socket. Remove the core temperature sensor plug from the socket. The display shows C3 You want to start pyrolyti...
Page 27 - INSTALLATION
Packaging material The packaging material is environmentally - friendly and recyclable. Plastic parts are marked with international abbreviations such as PE, PS, etc. Dispose of the packaging material in the containers provided for this purpose at your local waste management facility. INSTALLATION W...
Page 28 - Installation
max. R1200 mm 130 140 alternativ 100 H05VV-F H05RR-F min. 1600 mm 90º 28 Installation
Page 29 - GUARANTEE/CUSTOMER SERVICE CENTRES
2x3,5x25 GUARANTEE/CUSTOMER SERVICE CENTRES EURO - LINE APPLIANCES INC. LENGTH OF WARRANTY EURO - LINE WILL PAY FOR: TWO YEAR FULL WARRANTY from original date of purchase, including parts and labour, to the first purchaser of this appli- ance Replacement parts and/or labour to repair de- fects in ma...
Page 30 - User Instructions & Installation Manual; EURO
For Service and Parts Contact:EURO - PARTS, USA EURO - PARTS, CANADA EURO - LINE APPLIANCES Tel: 1 - 800 - 561 - 4614 Fax: 1 - 519 - 528 - 5001 Tel: 1 - 800 - 678 - 8352 Fax: 1 - 519 - 528–5001 1 - 800 - 421 - 6332 Tel. Direct: 1 - 905 - 829 - 3980 Fax: 1 - 905 - 829 - 3985 User Instructions & I...
