Page 3 - CONTENTS
CONTENTS 4 Safety information 5 Safety instructions 8 Product description 10 Before first use 11 Control panel 13 Daily use 15 Clock functions 17 Automatic programmes 18 Using the accessories 21 Additional functions 24 Care and cleaning 27 What to do if… 28 Technical data 29 Environment concerns The...
Page 4 - Safety information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incor- rect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. Children and vu...
Page 5 - SAFETY; Installation
• To remove the shelf supports first pull the front of the shelf support and then the rear end away from the side walls. Install the shelf supports in the opposite sequence. SAFETY INSTRUCTIONS Installation WARNING! Only a qualified person must install this appliance. • Remove all the packaging.• Do...
Page 6 - Use
• Use only correct isolation devices: line protecting cut - outs, fuses (screw type fuses re- moved from the holder), earth leakage trips and contactors. • The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation dev...
Page 7 - Care and Cleaning; Risk of injury, fire or damage to the appliance.; Internal light; pliances. Do not use it for house lighting.; Disposal; Risk of injury or suffocation.
Care and Cleaning WARNING! Risk of injury, fire or damage to the appliance. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Make sure the appliance is cold. There is the risk that the glass panels can break.• Replace immediately the door glass pa...
Page 8 - PRODUCT DESCRIPTION; General overview
PRODUCT DESCRIPTION General overview 2 1 10 4 3 5 6 78 9 5 4 3 2 1 1 Control panel 2 Electronic programmer 3 Socket for the core temperature sensor 4 Heating element 5 Oven lamp 6 Fan 7 Rear wall heating element 8 Bottom heat 9 Shelf support, removable 10 Shelf positions 8 Product description
Page 9 - Accessories; Wire shelf
Accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Combi pan For cake and biscuits. To bake and roast or as pan to collect fat. • Core Temperature Sensor To measure how far the food is cooked. Product description 9
Page 10 - Telescopic runners; BEFORE FIRST USE; Initial Cleaning; Setting the time of day:; Changing the time of day
• Telescopic runners For shelves and trays. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance.• Clean the appliance before first use.Refer to chapter "Care and Cleaning". First connection to the mains After first c...
Page 11 - CONTROL PANEL; Electronic programmer; Use the sensor fields to operate the appliance.; Control panel
CONTROL PANEL Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field Function Description 1 - DISPLAY Shows the current settings of the appliance. 2 ON / OFF To activate and deactivate the appliance. 3 OPTIONS To set an oven function or programme. Str...
Page 12 - Heat up indicator
Display 6 1 2 3 5 4 7 1 Oven function symbol 2 Temperature / Time display 3 Clock / Residual heat display (also Minute minder and Time of day) 4 Residual heat indicator 5 Indicators for the clock functions (refer to the table "Clock functions") 6 Heat up indicator 7 Number of oven function /...
Page 13 - DAILY USE; The manual mode; Setting the oven function
DAILY USE WARNING! Refer to "Safety information" chapter. To operate the appliance you can use:• The manual mode - to set an oven function, the temperature and the cooking time manually. • automatic programmes - to prepare a dish when you do not have knowledge or experi- ence in cooking. Set...
Page 14 - Changing the oven temperature; Activating the fast heat up function; Energy saving
Oven function Application 10 Defrost To defrost frozen food. 11 Bottom Heat To bake cakes with a crispy base, and for the food preserva- tion. 12 ECO Roasting The ECO functions let you optimize the energy consumption during cooking. It is necessary to set the cooking time first. To get more informat...
Page 15 - CLOCK FUNCTIONS; Count Up Timer; Reset the Count Up Timer:; Setting the DURATION
– the oven is off: you can use the heat to keep the food warm. The indication: the clock/ Residual heat display shows the remaining temperature, the bars show the decreasing temperature. • Oven lamp off - touch to deactivate the oven lamp during cooking; • Display off - if necessary, deactivate the ...
Page 17 - Setting the Time delay function; AUTOMATIC PROGRAMMES; There are three types of automatic programmes:; Automatic recipes; Setting an automatic recipe:; Automatic programmes with weight input
2. Use or to set MINUTE MINDER. First you set seconds and then minutes and hours. 3. Touch or the MINUTE MINDER starts automatically after five seconds. 4. When set time ends, an acoustic signal operates for two minutes and "00:00" and flash in the display. 5. Touch any sensor field or open ...
Page 18 - Using My Favourite Programme function:; USING THE ACCESSORIES
1. Touch again and again until the display shows . 2. Touch or to set the weight programme (refer to "Recipe book"). The display shows: cooking time, duration symbol , a default weight, a unit of measurement (kg, g). 3. Touch or the settings save automatically after five seconds. 4. The appl...
Page 19 - The core temperature sensor; There are two temperatures to set:
The core temperature sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the appliance deactivates. There are two temperatures to set: • The oven temperature: refer to the table for roasting in the recipe book.• The core temperature:...
Page 20 - Installing the Oven Accessories; Installing the wire shelf and the deep pan to-
8. Remove the core temperature sensor from the socket and remove the meat from the appliance. WARNING! Be careful when you remove the core temperature sensor. It is hot. There is a risk of burns.9. Deactivate the appliance. When you put the core temperature sensor into the socket, you cancel the set...
Page 21 - Inserting the wire shelf and the deep pan to-; ADDITIONAL FUNCTIONS; My Favourite Programme function
Telescopic runners - Inserting the Oven Accessories Put the baking tray or the deep pan on the tele- scopic runners. Put the wire shelf on the telescopic runners so that the feet point downwards.The high rim around the wire shelf is an addition- al device to prevent cookware from slipping. Inserting...
Page 22 - Child Lock; Activating and deactivating the Child Lock function:; Function Lock; Activating/deactivating the Function Lock function:
When the function operates, you can change the time and temperature. Child Lock The Child Lock prevents an accidental operation of the appliance. Activating and deactivating the Child Lock function: 1. Deactivate the appliance with . Do not set an oven function. 2. Touch and hold and at the same tim...
Page 23 - Activate the Settings menu:; Automatic switch; Brightness of the display; There are two modes of display brightness:; Cooling fan
You can set the settings menu only when the appliance is off. Activate the Settings menu: 1. If necessary, deactivate the appliance . 2. Touch and hold for three seconds.The display shows "SET1" and "1" flashes. 3. Touch / to set the setting. 4. Touch . 5. Touch / to change the value...
Page 24 - Mechanical door lock; To activate the door lock:; CARE AND CLEANING; Shelf support
Mechanical door lock The door lock is not active when you buy the appliance. To activate the door lock: Pull the door lock forward until it locks in place. To deactivate the door lock: Push the door lock back into the panel. Opening the appliance door: 1. Push and hold the door lock. 2. Open the doo...
Page 25 - Ceiling; Folding down the heating element
Removing the shelf support 1. Pull the front of the shelf support away from the side wall. 2. Pull the shelf support from the back of the side wall to remove it. To install the shelf support follow the proce- dure in reverse. Valid with telescopic runners: The retaining pins on the telescopic shelf ...
Page 26 - Oven lamp; Before you change the oven lamp:; Door and glass panels
Oven lamp WARNING! There is a risk of electrical shock. The oven lamp and the lamp glass cover can be hot. Before you change the oven lamp: • Deactivate the appliance.• Remove the fuses from the fuse box or deactivate the circuit breaker. CAUTION! Put a cloth on the bottom of the interior of the app...
Page 27 - WHAT TO DO IF...
Removing the door 1. Open the door as far as it goes. 2. Fully press clamping levers (A) on the two door hinges. 3. Close the door until the first position (angle approximately 70°). 4. Hold of the door with one hand on each side and pull it away from the at an up angle. To install the door follow t...
Page 28 - front frame of the appliance cavity.; TECHNICAL DATA; Technical data
Problem Possible cause Solution The appliance does not heat up. The appliance is deactivated. Activate the appliance. The appliance does not heat up. The time of day is not set. Set the clock. Refer to "First setting the time of day". The appliance does not heat up. The necessary settings ar...
Page 29 - ENVIRONMENT CONCERNS; The packaging material is environmentally
Frequency 50 Hz ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is d...
