Page 2 - Recycle the materials with the symbol; VISIT OUR WEBSITE FOR:; General information and tips
CONTENTS 4 SAFETY INFORMATION6 PRODUCT DESCRIPTION7 CONTROL PANEL8 PROGRAMMES 10 OPTIONS12 BEFORE FIRST USE15 DAILY USE18 CARE AND CLEANING19 TROUBLESHOOTING21 TECHNICAL INFORMATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it....
Page 3 - We recommend the use of original spare parts.
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative technologies that helpmake life simpler – features you might not find on ordinary appliances. Please spenda few minutes reading to get the very best from ...
Page 4 - SAFETY INFORMATION; INSTALLATION
SAFETY INFORMATION Before the installation and use of theappliance, carefully read the suppliedinstructions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Al-ways keep the instructions with the ap-pliance for future reference. CHILDREN AND VULN...
Page 5 - Only for UK and Ireland.; USE
ble. Contact Service or an electricianto change a damaged mains cable. • Connect the mains plug to the mains socket only at the end of the installa-tion. Make sure that there is accessto the mains plug after the installa-tion. • Do not pull the mains cable to dis- connect the appliance. Always pullt...
Page 6 - PRODUCT DESCRIPTION; TIME BEAM
PRODUCT DESCRIPTION 1 2 3 4 5 8 10 6 7 12 9 11 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket TIME BEAM Time Beam is a light beam that sh...
Page 7 - CONTROL PANEL
CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Delay touchpad 4 Programme touchpad 5 ExtraHygiene touchpad 6 ÖKO PLUS touchpad 7 Multitab touchpad 8 RESET touchpad 9 Indicators Indicators Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indic...
Page 8 - PROGRAMMES
PROGRAMMES Programme Type of soilType of load Programme phases Options 1 1) AllCrockery, cutlery,pots and pans PrewashWash 45 °C or 70 °CRinsesDry ExtraHygieneÖKO PLUS 2 2) Heavy soilCrockery, cutlery,pots and pans PrewashWash 70 °CRinsesDry ÖKO PLUS 3 3) Normal soilCrockery andcutlery PrewashWash 5...
Page 9 - Consumption values; Programme
Consumption values Programme 1) Duration (min) Energy (kWh) Water (l) 1 90 - 160 0.9 - 1.7 8 - 15 2 140 - 160 1.4 - 1.6 13 - 14 3 200 - 220 1.1 - 1.2 9 - 11 4 30 0.8 9 5 160 - 170 0.9 - 1.0 9 - 11 6 50 - 60 1.0 - 1.1 10 - 11 7 70 - 80 0.8 - 0.9 11 - 12 8 14 0.1 4 1) The water pressure and temperatur...
Page 10 - OPTIONS; MULTITAB FUNCTION
OPTIONS MULTITAB FUNCTION Activate this function only when youuse the combi detergent tablets.This function deactivates the flow ofrinse aid and salt. The related indicatorsare off.The programme duration can increase. Activating the multitab function Activate or deactivate the multi-tab function bef...
Page 12 - BEFORE FIRST USE
BEFORE FIRST USE 1. Make sure that the set level of thewater softener agrees with the waterhardness in your area. If not, adjustthe water softener. Contact your lo-cal water authority to know the wa-ter hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the w...
Page 14 - FILLING THE RINSE AID DISPENSER; Press the release button (
FILLING THE RINSE AID DISPENSER M AX 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwash-ers. Other products can causedamage to the appliance. The rinse aid, during the lastrinsing phase, helps to dry thedishes without streaks andstains. 1. Press the release button ( D ) to open the lid ( C...
Page 15 - DAILY USE; LOADING THE BASKETS
DAILY USE 1. Open the water tap. 2. Press the on/off button to activatethe appliance. Make sure that theappliance is in setting mode. Referto ’SETTING AND STARTING APROGRAMME’.• If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3....
Page 16 - USING THE DETERGENT; Setting mode; RESET; until the appliance is
USING THE DETERGENT 20 30 M A X 1 2 3 4 + - A B C CAUTION! Use only detergents for dish-washers. 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart-ment ( A ) . 3. If the programme has a prewashphase, put a small quantity of de-tergent on the inner part of t...
Page 17 - Cancelling the programme; At the end of the programme; AUTO OFF
2. Press the delay touchpad again andagain until the display shows the de-lay time you want to set (from 1 to24 hours).• The delay time flashes in the dis- play. • The delay indicator is on. 3. Close the appliance door. Thecountdown starts.• If you open the door, the display shows the countdown of t...
Page 18 - CARE AND CLEANING; CLEANING THE FILTERS; clockwise and remove it.; CLEANING THE SPRAY ARMS
CARE AND CLEANING WARNING! Before maintenance, deactivate the ap-pliance and disconnect the mains plugfrom the mains socket. Dirty filters and clogged sprayarms decrease the washing re-sults.Make a check regularly and, ifnecessary, clean them. CLEANING THE FILTERS A B C C A1 A2 1. Turn the filter ( ...
Page 19 - TROUBLESHOOTING
TROUBLESHOOTING The appliance does not start or it stopsduring operation.First try to find a solution to the prob-lem (refer to the table). If not, contactService. With some problems, the displayshows an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the wat...
Page 21 - TECHNICAL INFORMATION
Problem Possible cause Possible solution The quantity of detergentwas too much. Make sure that you add thecorrect quantity of detergentin the dispenser before youstart a programme. Dry water dropstains on glassesand dishes. The released quantity ofrinse aid was not sufficient . Increase the released...
