Page 2 - General information and tips
CONTENTS 4 SAFETY INFORMATION6 PRODUCT DESCRIPTION7 CONTROL PANEL8 PROGRAMMES 10 OPTIONS11 BEFORE FIRST USE14 DAILY USE17 CARE AND CLEANING18 TROUBLESHOOTING20 TECHNICAL INFORMATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containersto recycle it.H...
Page 3 - We recommend the use of original spare parts.
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative technologies that helpmake life simpler – features you might not find on ordinary appliances. Please spenda few minutes reading to get the very best from ...
Page 4 - SAFETY INFORMATION; INSTALLATION
SAFETY INFORMATION Before the installation and use of theappliance, carefully read the suppliedinstructions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Al-ways keep the instructions with the ap-pliance for future reference. CHILDREN AND VULN...
Page 6 - PRODUCT DESCRIPTION
PRODUCT DESCRIPTION 1 2 3 4 5 8 10 6 7 12 9 11 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket 6
Page 7 - CONTROL PANEL
CONTROL PANEL 1 3 4 5 6 7 9 2 8 A B C 1 On/off button 2 Programme guide 3 Program touchpad 4 Programme indicators 5 Display 6 Delay touchpad 7 Start touchpad 8 Indicators 9 Option touchpad Indicators Description Multitab indicator. ÖKO PLUS indicator. ExtraHygiene indicator. Washing phase indicator....
Page 8 - PROGRAMMES
PROGRAMMES Programme Type of soilType of load Programme phases Options 1) AllCrockery, cutlery,pots and pans PrewashWash 45 °C or 70 °CRinsesDry ExtraHygieneÖKO PLUS 2) Heavy soilCrockery, cutlery,pots and pans PrewashWash 70 °CRinsesDry ÖKO PLUS 3) Normal soilCrockery and cut-lery PrewashWash 50 °C...
Page 9 - Consumption values; Programme
Consumption values Programme 1) Energy (kWh) Water (l) 0.9 - 1.7 8 - 15 1.4 - 1.6 13 - 14 1.1 - 1.2 9 - 11 0.8 9 0.9 - 1.0 9 - 11 1.0 - 1.1 10 - 11 1.3 - 1.5 14 - 15 0.8 - 0.9 11 - 12 1) The display shows the programme duration. The water pressure and temperature, the variations of the mains supply,...
Page 10 - OPTIONS; MULTITAB FUNCTION; traHygiene
OPTIONS MULTITAB FUNCTION Activate this function only when youuse the combi detergent tablets.This function deactivates the flow ofrinse aid and salt. The related indicatorsare off.The programme duration can increase. ÖKO PLUS This function decreases the tempera-ture in the drying phase. The energyc...
Page 11 - BEFORE FIRST USE
BEFORE FIRST USE 1. Make sure that the set level of thewater softener agrees with the waterhardness in your area. If not, adjustthe water softener. Contact your lo-cal water authority to know the wa-ter hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the w...
Page 12 - Delay; FILLING THE SALT CONTAINER
Manual adjustment Turn the water hardness dial to the po-sition 1 or 2. Electronic adjustment 1. Press the on/off button to activatethe appliance. 2. Make sure that the appliance is insetting mode. Refer to ‘SETTINGAND STARTING A PROGRAMME’. 3. Press and hold Delay and Start at the same time until t...
Page 13 - FILLING THE RINSE AID DISPENSER; Press the release button (
FILLING THE RINSE AID DISPENSER M AX 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwash-ers. Other products can causedamage to the appliance. The rinse aid, during the lastrinsing phase, helps to dry thedishes without streaks andstains. 1. Press the release button ( D ) to open the lid ( C...
Page 14 - DAILY USE; LOADING THE BASKETS
DAILY USE 1. Open the water tap. 2. Press the on/off button to activatethe appliance. Make sure that theappliance is in setting mode. Referto ’SETTING AND STARTING APROGRAMME’.• If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3....
Page 15 - USING THE DETERGENT; Setting mode
USING THE DETERGENT 20 30 M A X 1 2 3 4 + - A B C CAUTION! Use only detergents for dish-washers. 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart-ment ( A ) . 3. If the programme has a prewashphase, put a small quantity of de-tergent on the inner part of t...
Page 17 - CARE AND CLEANING; CLEANING THE FILTERS; clockwise and remove it.; CLEANING THE SPRAY ARMS
CARE AND CLEANING WARNING! Before maintenance, deactivate the ap-pliance and disconnect the mains plugfrom the mains socket. Dirty filters and clogged sprayarms decrease the washing re-sults.Make a check regularly and, ifnecessary, clean them. CLEANING THE FILTERS A B C C A1 A2 1. Turn the filter ( ...
Page 18 - TROUBLESHOOTING; Start
TROUBLESHOOTING The appliance does not start or it stopsduring operation.First try to find a solution to the prob-lem (refer to the table). If not, contactService. With some problems, the displayshows an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the wat...
Page 20 - TECHNICAL INFORMATION
Problem Possible cause Possible solution The quantity of detergentwas too much. Make sure that you add thecorrect quantity of detergentin the dispenser before youstart a programme. Dry water dropstains on glassesand dishes. The released quantity ofrinse aid was not sufficient . Increase the released...
