Page 2 - Visit the webshop at:
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best fr...
Page 3 - CONTENTS
CONTENTS 4 Safety information 6 Technical data 6 Product description 8 Control panel 10 First use 10 Personalization 11 Daily use 16 Washing programmes 20 Consumption values 20 Helpful hints and tips 22 Care and cleaning 27 What to do if… 31 Installation 36 Electrical connection 37 Building-in 38 En...
Page 4 - General safety
SAFETY INFORMATION Read carefully & keep for future reference. • The safety of Your appliance complies with the industry standards and with legal re - quirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. • It is most imp...
Page 7 - Detergent dispenser drawer; tion phase
1 6 5 3 4 2 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet Detergent dispenser drawer Compartment for prewash phase or stain re - mover. The prewash detergent is added at the beginning of the wash programme. The stain remover is added...
Page 8 - CONTROL PANEL; Table of Symbols
CONTROL PANEL Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and the display. These are presented by relevant numbers on the following pages. 1 2 3 4 5 6 7 8 9 1 Programme selector dial 2 TEMPERATURE button 3 SPIN reduction button 4 OPTION button...
Page 9 - Display
Display 9.1 9.2 9.3 9.9 9.4 9.5 9.6 9.7 9.8 9.1 - Temperature indicator and COLD symbol 9.2 - Spin Speed indicator, RINSE HOLD , NIGHT CYCLE - symbols 9.3 - Programme progress display: PREWASH , MAIN WASH , RINSE , SPIN , DRAIN , OVERDOSAGE • The programme progress display shows the washing phases o...
Page 10 - Err; FIRST USE; Acoustic signals
– If an option which is not compatible with the set wash programme is selected, the message Err is displayed for about 2 seconds and the yellow light of button 7 starts blinking. • Alarm codes – In the event of operating problems, some alarm codes can be displayed, for example (see chapter «What to ...
Page 11 - DAILY USE; Load the laundry; prewash
DAILY USE Load the laundry 1. Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. 2. Close firmly the door. You must hear a click during closing. WARNING! Do not embed the laundry between the door and t...
Page 12 - Select the desired TEMPERATURE (Button 2)
Select the required programme by means of programme selector dial (1) You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Programmes»). Turn the programme selector dial to the required programme. The programme selector d...
Page 13 - Programme option buttons; PREWASH option; is not; SENSITIVE option
To empty out the water, please read chapter «At the end of the programme». Programme option buttons Depending on the programme, different functions can be combined. WARNING! Not all the options are compatible among themselves. The symbols of the incompatible op - tions disappear. Anyway, if an optio...
Page 15 - Altering an option or a running programme; only by resetting it; Interrupting a programme; attention to the water level and temperature!); At the end of the programme; follow the
Selecting the delayed start.• Select the programme and the required options.• Select the delay start.• Press button 7 : the appliance starts its hourly countdown. The programme will start after the selected delay has expired. Cancelling the delayed start• Set the washing machine to PAUSE by pressing...
Page 16 - Stand by; WASHING PROGRAMMES
• turn the programme selector dial to • select the DRAINING or SPINNING programme• reduce the spin speed if needed, by means of the relevant button• press the button 7 • when the programme has finished the display shows a blinking . On the display the DOOR symbol disappears and the door can be opene...
Page 17 - Washing programmes
Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartment JEANS 60° - Cold Main wash - Rinses - Long spin Maximum spin speed 1200 rpm Max. load 3 kg With this programme it is possible to wash items like pants, sh...
Page 20 - CONSUMPTION VALUES; HELPFUL HINTS AND TIPS; Sorting out the laundry
CONSUMPTION VALUES Programme Energy consumption (KWh) Water consumption (litres) Programme duration (Minutes) White Cottons 95° 2.1 57 For the duration of the programmes, please refer to the display on the control panel. Cottons 60° 1.2 53 Cotton Energy SavingProgramme 60° 1) 1.02 42 Cottons 40° 0.7...
Page 21 - Ball point pen and glue:; Detergents and additives; without; Quantity of detergent to be used
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites and fast coloureds only). Gra...
Page 22 - hardness is soft, readjust the quantity of the detergent.; CARE AND CLEANING; any cleaning or maintenance work.
Degrees of water hardness Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. If the water hardness degree is medium or high we suggest you to add a wa...
Page 23 - Washing drum
1. To aid cleaning, the top part of the addi - tive compartment should be removed. Re - move the detergent dispenser drawer by pressing the catch downwards and by pulling it out. 2. Flush it out under a tap, to remove any traces of accumulated powder. 3. Having removed the drawer, use a small brush ...
Page 24 - Door seal; Check from time to time the door seal and objects; Drain pump; collect any spillage.
Door seal Check from time to time the door seal and objects that could be trapped in the fold. Drain pump The pump should be inspected regularly and particularly if:• the appliance does not empty and/or spin;• the appliance makes an unusual noise during draining due to objects such as safety pins, c...
Page 25 - Cleaning the water inlet filters
5. When no more water comes out, unscrew the pump cover ( A ) by turning it anti- clockwise and remove the filter. Use pli - ers, if necessary. Always keep a rag nearby to dry up any water spillages when re - moving the cover.Clean the filter under a tap, to remove any traces of fluff. 6. Remove for...
Page 26 - Emergency emptying out
1. Turn off the water tap.2. Unscrew the hose from the tap.3. Clean the filter in the hose with a stiff brush. 4. Screw the hose back onto the tap. Make sure the connection is tight. 5. Unscrew the hose from the machine. Keep a towel nearby because some water may flow. 6. Clean the filter in the val...
Page 27 - Frost precautions; WHAT TO DO IF...; yellow
is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out; 5. clean the pump if necessary as previously described;6. replace the emergency emptying hose in its seat after having plugged it;7. screw the pump again. Frost precautions If the machine is in...
Page 28 - What to do if...
Problem Possible cause/Solution The washing machine does not start: The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket.• Insert the plug into the power socket. There is no power at the socket.• Please check your domestic electrical instal - l...
Page 31 - INSTALLATION; Unpacking
INSTALLATION Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.1. After removing all the packaging, careful - ly lay machine on it’s back to remo...
Page 32 - Positioning and levelling
3. Unscrew the three bolts with the key sup - plied with the appliance. 4. Slide out the relevant plastic spacers. 5. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. Positioning and levelling Install ...
Page 33 - Water inlet; This appliance must be connected to a cold water supply.
If it is impossible to avoid positioning the machine next to a gas cooker or coalburning stove, an insulating panel covered with aluminium foil on the side facing the cooker or stove, must be inserted between the two appliances. The machine must not be installed in rooms where the temperature can dr...
Page 35 - Water drainage; In a sink drain pipe branch.
Water-stop device The inlet hose is provided with a water stop de - vice, which protects against damage caused by water leaks in the hose which could develop due to natural ageing of the hose. This fault is shown by a red sector in the window «A» . Should this oc - cur, turn the water tap off and re...
Page 36 - joining piece is available from your local Service Centre.; ELECTRICAL CONNECTION; taking into account any other appliances in use.
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre. ELECTRICAL CONNECTION Information on the electrical connection is given on the rating plate on the inner edge of the appliance door. Check that your domest...
Page 38 - ENVIRONMENT CONCERNS; Packaging materials
Fix the hinges (1) to the machine by means of the M5x15 screws (3-Fig. B ). The hinges can be adjusted to compensate for possible uneven thickness of the door.To align the door perfectly it is necessary to loosen the screw (3-Fig. B ), adjust the door and tighten the screw again. • Counter-magnet (6...
Page 39 - Ecological hints; then be washed at a lower temperature.
>PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collec - tion containers. Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips:• No...
