AEG 65320K-MNAB2- User Manual

Safety 6 Safety When Cleaning • For safety reasons do not clean the appliance with a steam jet or high pressure cleaner. • Clean the hob in accordance with the maintenance and cleaning instructions in this manual. How to Avoid Damage to Your Appliance • Do not use the hob as a work surface or for st...

Disposal 7 2 Disposal Disposing of packaging material All materials used can be recycled.The plastics are marked as follows:• >PE< for polyethylene, e.g. as used for the outer wrapping and the bags inside. • >PS< for polystyrene foam, e.g. as used for the packing pieces, com- pletely fre...

The Key Features of Your Appliance 8 The Key Features of Your Appliance • Ceramic glass Cooking Surface : the appliance has a VITRAMIC® cooking surface made of glass ceramic and 4 fast heating cooking zones. The particularly powerful radiant heater elements significantly shorten the amount of time t...

The Key Features of Your Appliance 9 • Timer : all four rings can be automatically switched off using the integrated timer. When the end of the cooking time has been reached, the cooking zone switches off.

Appliance Description 65320 K 12 Heat setting selection + and - For setting and adjusting the heat setting ( ! to ) ) for the selected cooking zone, or when in timer mode, to set or change the required cooking time. –The heat setting or the cooking time is increased using the + but- ton and the auto...

Cooking zone safety switch 13 Automatic pan sensing Pan and triple ring sensing is automatically activated when the cooking zone is switched on. If a cooking zone button is pressed, but there is not a suitable pan on the cooking zone, or the pan is too small, f (Fault) appears in the dis- play. This...

Before Using for the First Time 14 Before Using for the First Time Cleaning for the first time Wipe the ceramic glass cooking surface with a damp cloth to remove any traces left from manufacturing. 1 Important: Do not use any caustic, abrasive cleaners! The surface could be damaged. Operation of the...

Operation of the Cooking Surface 15 Cooking with the automatic warm up function All four rings on the cooking surface have nine heat settings and are equipped with an automatic warm up function. – ! , lowest heat setting – ) , highest heat setting – a , automatic warm up function. Using the + button...

Operation of the Cooking Surface 16 3 If you select a higher setting when the automatic function is in opera-tion, e.g. from § to % , the previous warm up time is taken into account. If you select a lower setting, then the automatic warm up function is brought to an immediate end. If you start cooki...

Operation of the Cooking Surface 17 Locking/unlocking the control panel At any time during the cooking process, the control panel can be locked, with the exception of the “On/Off“ button. By this means acci-dental changes to the settings can be prevented. This function is also useful as a child safe...

Operation of the Cooking Surface 18 Timer function Setting/changing the cooking time 0 1. Select the desired cooking zone using the cooking zone selection but- tons and set the desired heat setting. 2. Press the “Timer“ button to activate the timer function for this cooking zone. 3. Using the + or -...

Operation of the Cooking Surface 19 Ending the timer function early There are two ways of switching off the timer early: Switching off the cooking zone and timer simultaneously 0 1. Select the desired cooking zone using the cooking zone buttons. If the selected cooking zone is in timer mode (TIMER i...

Operation of the Cooking Surface 20 Automatic pan and triple ring sensing Pan and triple ring sensing is automatically activated when the cooking zone is switched on. Electronic sensors are fitted under the cooking zones. These detect: –the material that the pan is made of,–the size of the base of t...

Tables and Tips 22 Tables and Tips Pans The better the pan, the better the results. • You can recognise good quality pans by the base of the pan. • The base should be as thick and flat as possible. Rough bases (e.g. on cast iron pans) will scratch the cooking surface when slid. • Use high sided pans...

Tables and Tips 23 You will waste energy if the.... Tips for cooking with and without the automatic warm up function The automatic warm up function is suitable for: • dishes that start off cold, are heated up at a high setting and do not need to be continually watched when cooking, • dishes that are...

Tables and Tips 24 Typical Heat Settings The figures given in the following tables are for guidance only. Exactly which heat setting needs to be used depends on the quality of the pans and the type and quantity of the food. Table: Cooking and Frying Switch Setting Automatic Warm Up Time * (Min.) *) ...

Cleaning and Care 25 Cleaning and Care Ceramic glass cooking surface It is important to clean the cooking surface after each use! 1 Important! Never use aggressive cleaners such as, for example, coarse scouring cleaners or pan cleaners that scratch. 0 1. Always clean the cooking surface after each u...

Cleaning and Care 26 Stubborn Soilage Residues from food that has boiled over First soften these using a wet cloth and then remove residues using a glass scraper. 1 Caution! Take care when using a glass scraper! Then clean the cooking surface with the recommended cleaners. Sugar 1 Warning! Remove bu...

Cleaning and Care 27 Spots Scale, shiny pearl like spots, metallic iri-descent coloured spots, and food rem-nants from pans that have formed during cooking are best removed when the cooking zones are still warm . Use the cleaners and polishes recom-mended. If necessary, clean more than once. Acids 1...

30 .... f is shown in the display? 0 Check whether –a pan that is too small is on the cooking zone.–the cooking zone has been overheated. If a cooking zone button is pressed and the pan on the cooking zone is too small, f (Fault) appears in the display. This symbol is also displayed in the case of o...

What to do if ... 31 SERVICE & SPARE PARTS If you wish to purchase spare parts or require an engineer, contact your local AEG Service Force Centre by telephoning: 08705 929 929 Your telephone call will be automatically routed to the Service Centre covering your post code area. When you contact t...

What to do if ... 32 GUARANTEE CONDITIONS Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or...

Technical Data 33 INSTALLATION INSTRUCTIONS 1 Important! This appliance must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards.Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Techn...

Installing and Connecting Up 35 Installing and Connecting Up Installing 1 Important: The new appliance is only to be installed and connected up by an approved installer . Please observe this instruction, otherwise the warranty will not cover any damage that may occur.The veneer or plastic coverings ...

Installing and Connecting Up 38 Electrical connection Assembly and connection of the new appliance may only be performed by an approved installer . Please observe this instruction, otherwise the warranty will not cover any damage that may occur. 1 Attention! Only the cable fitted to the cooking surf...

AEG Hausgeräte GmbHPostfach 1036D-90327 Nuremburg http://www.aeg.hausgeraete.de © Copyright by AEG ANC 822 947 296 - 05 - 0500 Hier Typschild aufkleben! (nur für Werk)