Page 2 - Please read these user instructions carefully.
2 Dear customer! Please read these user instructions carefully. Above all please observe the safety instructions on the first few pagesof these user instructions! Please keep these user instructions for laterreference. Pass them on to any subsequent owner of the appliance. The warning triangle and/o...
Page 3 - Contents; Safety instructions; Disposing of the packaging; Description of the appliance
3 Contents Safety instructions 4 Disposing of packaging and old machine 6 Disposing of the packaging 6 Disposing of your old machine 6 Economical and ecological dishwashing 7 Description of the appliance 8 The inside of the appliance 8 Control panel 8 Before using your dishwasher for the first time ...
Page 4 - Using your dishwasher for its intended purpose
4 Safety instructions The safety of AEG electrical appliances conforms to accepted rules oftechnology and the Appliance Safety Act. We as manufacturers, however, seeourselves as being obliged to familiarise you with the following safetyinstructions. Using your dishwasher for its intended purpose ● O...
Page 5 - Do not rest or sit on the open door or the machine could tilt.
5 ● The water in your dishwasher should not be used for drinking. Detergent residues may still be present in your machine. Make sure you do not splash these caustic residues onto your skin or suffocate yourself! Keep children well away from your dishwasher when its door is open. Your dishwasher in d...
Page 6 - Disposing of packaging and old machine; The plastics are marked as follows:; Disposing of your old machine
Marking of plastic parts for graded recycling: all plastic parts in yourmachine are marked with internationally standardised abbreviations (e.g.<PS> for polystyrene). When your machine is disposed of, this enables plasticwaste to be sorted into individual types for environmentally consciousrec...
Page 7 - Economical and ecological dishwashing; Ensure that the water softener is correctly adjusted.
7 Economical and ecological dishwashing ● Only connect the dishwasher to the hot water supply if your hot water is not electrically heated. ● Ensure that the water softener is correctly adjusted. ● Do not pre-rinse under running water. ● Select the wash programme to suit the nature and degree of the...
Page 8 - The inside of the appliance
8 1. On/Off indicator light 2. On/off pushbutton 3. Programme selection pushbuttons 1 2 3 4 5 6 7 8 9 Control panel Description of the appliance 1 2 3 4 5 6 7 8 IN95 The inside of the appliance 1. Upper spray arm 2. Salt container 3. Detergent dispenser 4. Control panel 5. Rinse aid dispenser 6. Fil...
Page 9 - Programme phase indicator lights; Each phase is indicated with a symbol; Salt
9 4. Door handle 5. Digital display 6. "Small load" pushbutton This is very useful and economical when only a few dishes need washing. Remember to load the crockery into both baskets. The indicator light corresponding to this option will come on when selected. 7. Programme phase indicator li...
Page 10 - Flashes when the door has not been properly closed.
10 Water tap Flashes when:- The water tap is closed.- The mains supply has been cut off.- The inlet hose may be blocked. Open door Flashes when the door has not been properly closed. 9. "Delay start" pushbutton Allows the start of the programme to be delayed by a minimum of 1 hour, up to 12 ...
Page 12 - Before using your dishwasher for the first time; Remove all packaging from inside the appliance.; Setting the water hardness range; The higher the content of these salts, the harder your water is.
12 Before using your dishwasher for the first time 1. Ensure that the electrical and water connections comply with the installation instructions. 2. Remove all packaging from inside the appliance. 3. Set the water softener. 4. Pour 0,5 l of water inside the salt container and then fill with salt. 5....
Page 13 - To set a different level, proceed as follows:; which corresponds to the
13 To set a different level, proceed as follows: 1. Press the On/Off pushbutton. 2. Press the "small load" and "delay start" pushbuttons simultaneously for about 5 seconds, in the display will appear L4 which corresponds to the current level. 2. Press the "delay start" pushbu...
Page 14 - Filling with special salt; The packaging of dishwasher salt and detergents are often very
14 Filling with special salt Caution! The packaging of dishwasher salt and detergents are often very similar. The accidental filling of the salt compartment with detergent wouldruin the water softener. Each time you add salt, make sure the carton youhave in your hand really is salt. To fill: 1. To f...
Page 15 - The salt refill indicator light on the control panel can remain; Filling up the rinse-aid
15 Important: The salt refill indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuring thedishwasher remains on. If you are using salts that take longer to dissolvethen this can take longer. The function of the dishwasher is not affected...
Page 16 - Adjusting the dose; Start from position 3.
16 Adjusting the dose The correct dosage of the rinse-aidshould be regulated on the basis ofthe shine and drying results. For this purpose, set the quantity ofliquid by means of the six-positionselector (C) located on the inside ofthe filler opening (minimum quantityis position 1, maximum quantity i...
Page 17 - Loading cutlery and dishes; Open the door and slide out the baskets.; Do not load very small items which can fall through the baskets.
17 Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. For washing in the dishwasher the following cutlery/dishes are not suitable: ● Cutlery with wooden, horn, china or mother of pearl handles. ● Plastic items that are not h...
Page 19 - Cutlery basket; Exceptionally long cutlery, such as soup ladles, kitchen knives, or
19 Cutlery basket Place knives, forks and spoons in the cutlery basket with their handlespointing downwards. Arrange cutlery loosely and distribute it in all compartments so that eachindividual article has good contact with washing water. Also do not arrangespoons and forks with their dirty side in ...
Page 20 - The upper basket
20 The upper basket The upper basket is designed for plates(dessert plates, saucers, dinner platesup to 24 cm in diameter), salad bowls,cups and glasses; these should bearranged as shown in the pictures. Glasses with long stems can be placedupside-down in the raised cup-racks The cup-rack on the lef...
Page 21 - Adjusting the height of the upper basket
21 Adjusting the height of the upper basket If washing very large plates (over 27cm and up to 31 cm in diameter) youcan load them in the lower basketafter moving the upper basket to thehigher position. To move to the higher positionproceed as follows: 1. Move the front runner stops (A) of the upper ...
Page 22 - Use of detergent; Always close the lid.
22 Use of detergent Attention!Only use detergents specifically designed for use in dishwashers. If using powder detergents proceedas follows: 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent. As all detergents are not the same, please pay attention to the dosage instructions ...
Page 23 - BIO programmes and compact powders
23 Remember that insufficient quantities of detergent will producepoor washing results whereas an excessive amount of detergentdoes not improve washing results and is also wasteful. BIO programmes and compact powders On the basis of their chemical composition, dishwasher detergents can beclassified ...
Page 24 - Washing programmes
24 Washing programmes Programmes Intensive 70°C Normal 65°C Normal BIO 50°C Economy BIO 50°C * Quick 50°C Rinse and Hold Type of soilType of load Heavy soil.Crockery, cutlery,pots and pans Normal soil.Crockery and cutlery Normal soil with littleresidual.Crockery and cutlery Normal soil.Crockery and ...
Page 26 - Operating instructions
26 Operating instructions 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the On/Off pushbutton The On/Off indicator light will illuminate and in three horizontal lines (- - - ) will appear in the display. 3. Check that there is r...
Page 27 - The setting of the programme may occur:
27 The setting of the programme may occur: With open door, in this case the selected programme and eventual options (small load and/or delay start) will start automatically 5 seconds after the closure of the door. With closed door, in this case the selected programme and eventual options (small load...
Page 28 - flashing in the display indicates that the delay start is active.
28 8b. Set and start the programme with "delay start" ● Select the wash programme by simply pressing one of the programme pushbuttons, the display will show the running time of the programmein minutes and the indicator lights of the phases corresponding to the programme will illuminate. ● If...
Page 29 - At the end of the washing programme; and; To cancel a programme; This is possible either with an open or closed door.; To cancel a wash programme in progress,; press for about 5 seconds; During the setting of a programme with open door; setting simply press the On/Off pushbutton.
29 9. At the end of the washing programme ● The dishwasher will automatically stop and an audible signal informs you that the programme has ended. In the display appears 000 and the indicator lights of the programme and phases turn off. Press the On/Off pushbutton to switch the dishwasher off and op...
Page 31 - Maintenance and cleaning; Internal and external cleaning; The spray arms do not need cleaning.; Cleaning the filters; Turn the handle about
31 Maintenance and cleaning Internal and external cleaning Do not under any circumstances use furniture care products oraggressive cleaners. If necessary, clean the controls only with a soft cloth and pure warm water. The spray arms do not need cleaning. Occasionally check the internal containers, d...
Page 33 - - press the On/Off pushbutton to switch the dishwasher off
33 What to do, when... Try to rectify minor faults on the dishwasher with the aid of the instructionsgiven here. ...a flashing fault code appears an audible signal informs you that an alarm has been activated, in thedisplay appears one of the following flashing alarms: AL1 - AL2 - AL3 - AL4 -AL5 - A...
Page 34 - Visible lime deposits or white film on the dishes
34 ...problems occur during use of the dishwasher Malfunction The programme does notstart The machine is noisy The door is difficult toclose The plug is not properlyinserted in the powersocket. Insert the plug. There is no current at thesocket. Dishes are rattling againsteach other.The spray arms ar...
Page 35 - Customer service; To keep these numbers handy, we recommend you enter them here.
35 Customer service In the section “Servicing", we have listed the most important faults whichyou can rectify yourself. Should you still wish to call our Service Centre forany of the specified faults or because the appliance is being wronglyoperated, the service engineer's visit cannot be made f...
Page 36 - Hints for test centres; Arrangement upper basket
36 Hints for test centres Before starting any test it is necessary to fill completely with salt the saltcontainer and with rinse aid the rinse aid dispenser. Test standard Load Rinse aid selector Detergent dosage Reference programme EN 50242 position 4 - 20 g in the dispenser- 5 g on the dispenser l...
Page 37 - Technical data; Technical specifications
37 Technical data This appliance complies with the following E.E.C. Directives:- 73/23/CEE of 19/02/73 (Low Voltage Directive) and subsequentmodifications;- 89/336/CEE of 03/05/89 (Electromagnetic CompatibilityDirective) and subsequent modifications. Technical specifications Dimensions Electrical co...
Page 38 - Installation and connection instructions; Adjusting the worktop; - Remove the machine’s worktop by; Levelling
38 Installation and connection instructions Adjusting the worktop You can move the worktop forward orbackward by 25 mm in order to align themachine with other kitchen units. Simply unscrew the two front retainingscrews, move the top to the requiredposition and then retighten the screws. Fitting unde...
Page 39 - Connecting the water supply; Never connect; your dishwasher to open hot water appliances and
39 Connecting the water supply ● Your dishwasher can be connected to either a cold or hot water supply ofmax. 60°C. ● Never connect your dishwasher to open hot water appliances and continuous flow heaters! Nevertheless we advise you a cold water supply. A hot water supply is notalways efficient with...
Page 40 - Water outlet connection; The end of the drain hose can be connected as follows:
40 Water outlet connection The end of the drain hose can be connected as follows: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. Hooked over the edge of the sink using the special curved plastic guide provided. 3. To a wall outlet provided with vent-hole, minimum internal dia...
Page 41 - Extension hoses
41 Extension hoses The necessary extension hoses can be obtained from specialist shops or fromour technical assistance centres. The extension hose must be no longer than 2 metres and its internaldiameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the...
Page 42 - Water protection system; In cases of malfunction on the control panel will appear; the flashing; alarm; Electrical connection; Before plugging the appliance into the wall socket, make sure that:
42 Water protection system To protect your dishwasher from water damage, it is equipped with a waterprotection system. In cases of malfunction on the control panel will appear the flashing alarm "AL4" (see "What do do, when...). In this case turn off the water tap and call the Service Ce...
Page 43 - © Copyright by AEG
AEG Hausgeräte GmbHPostfach 1036D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG 152985 56/1 en es 152985 56/1 en-es 30-11-1999 15:06 Pagina 84
