Page 2 - CONTENTS; Contents
Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend ...
Page 3 - SAFETY; Correct use
OPERATING INSTRUCTIONS SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appl...
Page 4 - Installation; PRODUCT DESCRIPTION
Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person...
Page 5 - CONTROL PANEL
1 Upper basket 2 Water hardness dial 3 Salt container 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm 10 Worktop CONTROL PANEL 6 1 2 3 4 7 8 5 A B 9 1 Programme knob 2 Multitab button (MULTITAB) 3 Delay start button (DELAY) 4 Start button (STA...
Page 6 - Programme knob; the digital display shows two horizontal bars.; Multitab button; • Adjusted level of the water softener.
Indicator lights Wash phase Comes on when the washing phase or the rinsing phase operates. Dry phase Comes on when the drying phase operates. Multitab Comes on when you activate the multitab function Refer to 'Multitab function'. Salt 1) Comes on when it is necessary to fill the salt container. Refe...
Page 7 - USE OF THE APPLIANCE
• Programme duration. • Remaining time to the end of the programme. • End of a washing programme, the digital display shows a zero. • Number of hours in delay start. • Fault codes. Function buttons Use the function buttons for these operations: • To set the water softener. Refer to the chapter 'Sett...
Page 8 - The water softener is set at the factory at level 5.
Water hardness is measured in equivalent scales: • German degrees (dH°). • French degrees (°TH). • mmol/l (millimol per litre - international unit for the hardness of water). • Clarke. Adjust the water softener to the water hardness in your area. If necessary, contact your local water authority. Wat...
Page 9 - USE OF DISHWASHER SALT; Do these steps to fill the salt container:; USE OF RINSE AID
2. Release the function button A when the digital display shows the current setting. Examples: – level 5 = – level 10 = 3. Press function button A to change the water softener level. Every time you press the button, the level increases. 4. Turn the programme knob to the off position to save the oper...
Page 10 - Adjusting the rinse aid dosage
1. Press the release button (A) to open the rinse aid dispenser. 2. Fill the rinse aid dispenser with rinse aid. The mark 'max.' shows the maximum level. 3. Remove the spilled rinse aid with an ab - sorbent cloth to prevent too much foam during the subsequent washing pro - gramme. 4. Close the rinse...
Page 11 - LOADING CUTLERY AND DISHES; Helpful hints and tips
LOADING CUTLERY AND DISHES Helpful hints and tips CAUTION! Only use the appliance for household utensils that are applicable for dishwashers. Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.). • Before you load cutlery and dishes, do these steps: – Rem...
Page 12 - Cutlery basket
The rows of prongs in the lower basket can be flat to load large dishes, pots, pans and bowls. Cutlery basket WARNING! Do not put long-bladed knives in a vertical position. Arrange long and sharp cutlery hori - zontally in the upper basket. Be careful with sharp items. Use the cutlery grids. • Put t...
Page 13 - Upper basket
You can open the cutlery basket to remove the cutlery more easily. Do these steps to remove the cutlery: 1. Put the cutlery basket on a table or work sur - face. 2. Open the handle. 3. Remove the cutlery.Hold the two parts of the handle tightly when you move the cutlery basket. Upper basket The uppe...
Page 14 - Adjustment of the height of the upper basket
• For glasses with long stems, turn the glass holder to the left or to the right. • You can fold up or down the row of prongs on the left side of the upper basket to in - crease load flexibility. Adjustment of the height of the upper basket You can put the upper basket in two positions to increase l...
Page 15 - USE OF DETERGENT
USE OF DETERGENT Only use detergents (powder, liquid or tablet) that are applicable for dishwashers. Follow the data on the packaging: • Dosage recommended by the manufacturer. • Storage recommendations. Do not use more than the correct quantity of detergent to save an environment. Do these steps to...
Page 16 - MULTITAB FUNCTION; Do these steps if the drying results are not satisfactory:
4. If you use detergent tablets, put the de - tergent tablet in the detergent dispenser (A). 5. Close the lid of the detergent dispenser. Press the lid until it locks into position. Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning result...
Page 17 - WASHING PROGRAMMES; Washing programmes
The appliance must be switched off. 1. Press and hold function button A. Turn the programme knob counterclockwise until the programme marker agrees with the first washing programme on the control panel. 2. Release function button A when the display shows the water hardness level. 3. Turn the program...
Page 18 - Consumption values; SELECT AND START A WASHING PROGRAMME
Programme and pro - gramme knob posi - tion Degree of soil Type of load Programme description PREWASH Any Partial load (to be completed later in the day). 1 cold rinse (to prevent food scraps to bond). Detergent is not necessary with this programme. 1) During the Auto 45°-70° programme, the soil lev...
Page 20 - CARE AND CLEANING; Cleaning the filters
Standby mode If you do not switch off the appliance at the end of the washing programme, the appliance automatically goes into standby mode. The standby mode decreases energy consumption. Three minutes after the end of the programme, all indicator lights go off and the digital display shows one hori...
Page 21 - WHAT TO DO IF...
3. To unlock the filter system, turn the han - dle on the microfilter (B) approximately 1/4 anticlockwise. 4. Remove the filter system. 5. Hold the coarse filter (A) by the handle with the hole. 6. Remove the coarse filter (A) from the microfilter (B). 7. Remove the flat filter (C) from the bot - to...
Page 23 - TECHNICAL DATA; INSTALLATION INSTRUCTIONS; INSTALLATION; Fitting under a counter; Technical data
Product number : .......... Serial number : .......... The cleaning results are not satisfactory The dishes are not clean • The selected washing programme is not applicable for the type of load and soil. • The baskets are loaded incorrectly so that water cannot reach all surfaces. • Spray arms do no...
Page 25 - WATER CONNECTION; Water inlet hose
WATER CONNECTION Water inlet hose Connected the appliance to a hot (max. 60°) or cold water supply. If the hot water comes from alternative sources of energy that are more environmentally friendly (e.g. solar or photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption....
