Page 2 - The following symbols are used in the text:
2 Dear customer, Please read this User Information carefully and keep it to refer to at alater date.Pass it on to any subsequent owner of the appliance. The following symbols are used in the text: Safety instructionsWarning! Notes that concern your personal safety.Attention! Notes that show how to a...
Page 3 - CONTENTS; Operating instructions
CONTENTS Operating instructions 4 Safety instructions 4 Disposal 6 Economical and ecological dishwashing 6 Description of the appliance 7 The control panel 8 Prior to using for the first time 10 Setting the water softener 10 Filling the with salt 13 Rinse aid 14 In daily use 17 Loading cutlery and d...
Page 4 - Installation
OPERATING INSTRUCTIONS Safety instructions The safety of AEG electrical appliances conforms to accepted rules oftechnology and the Appliance Safety Act. We as manufacturers,however, see ourselves as being obliged to familiarise you with thefollowing safety instructions. It is most important that thi...
Page 6 - Disposal; Economical and ecological dishwashing
Disposal Dispose of the dishwasher packaging material correctly.All packaging materials can be recycled.Plastic parts are marked with standard international abbreviations:>PE< for polyethylene, e.g. sheet wrapping material. >PS< for polystyrene, e.g. padding material (always CFC-free). &...
Page 7 - Description of the appliance
Operating instructions 7 Description of the appliance 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket IN153 152965 29/0en 11-02-2004 10:13...
Page 8 - Function push buttons:; Delay start; The control panel
Operating instructions 8 Function push buttons: in addition to the dishwashing programme selected, the following functions can also be set with the help of thesebuttons: - water softener setting,- deactivation/activation of the inflow of rinse aid,- deactivation/activation of the audible signals,- t...
Page 9 - Audible signals; end of
Operating instructions 9 Audible signals Audible signals have been introduced to help indicate whichoperations the dishwasher is performing: "Setting of the water softener""End of programme""Something not working with the machine" Deactivation/activation of the audible signal...
Page 10 - Prior to using for the first time; Setting the water softener
Operating instructions 10 Prior to using for the first time Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of wa...
Page 11 - b) Setting electronically
a) Setting manually 1. Open the dishwasher door. 2. Remove the lower basket from the dishwasher. 3. Turn the water hardness switch to position 1 or 2 (see table). 4. Replace the lower basket. The dishwasher is factory set atposition 2. b) Setting electronically (The dishwasher must be switched off)T...
Page 13 - Filling the with salt
Operating instructions 13 Filling the with salt Only use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in adishwasher, especially table salt, will damage the water softener.Only fill with salt just before starting one of the complete wash...
Page 14 - Rinse aid; Ensure that the lid is closed after every refill.
Operating instructions 14 Rinse aid Rinse aid is automatically added during the last rinse, ensuringthorough rinsing, and spot and streak free drying. The dispenser, whichis positioned inside the door, holds about 110 ml of rinse aid, which issufficient for 16 - 40 dishwashing programmes, depending ...
Page 15 - Adjusting the dose
Operating instructions 15 Adjusting the dose According to the finish and drying results obtained, adjust the dose ofrinse aid by means of the 6 position selector (position 1 minimumdosage, position 6 maximum dosage). The dose is factory set in position 4.Increase the dose if there are drops ofwater ...
Page 16 - Deactivation/activation of the inflow of rinse aid
Operating instructions 16 If you are using dishwasher detergent that already contains rinse aid,the detergent including the rinse aid must be placed in the detergentcompartment. In this case the rinse aid inflow must be deactivated inorder to avoid a double dosage. Deactivation/activation of the inf...
Page 17 - In daily use; Loading cutlery and dishes; • When loading the dishes and cutlery, please note:
Operating instructions 17 In daily use • Check if it’s necessary to refill with special salt or rinse aid.• Load cutlery and dishes into the dishwasher.• Fill with dishwasher detergent.• Select a wash programme suitable for the cutlery and dishes.• Start the wash programme. Loading cutlery and dishe...
Page 19 - The lower basket
Operating instructions 19 Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans, lids, plates, saladbowls, cutlery etc.Serving dishes and large lids should be arranged around the edge ofthe basket, ensuring that the spray arms can...
Page 20 - The cutlery basket; Removable knife basket
Operating instructions 20 The cutlery basket Long bladed knives stored in an upright position are a potentialhazard.Long and/or sharp items of cutlery such as carving knives must bepositioned horizontally in the upper basket.Take care when loading or unloading sharp items such as knives. Removable k...
Page 21 - The upper basket; In case that plates are loaded in the upper basket:
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinnerplates of up to 26 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the cup racks so that water canreach all surfaces. Glasses with long stems can be placed upside down in the cup ...
Page 22 - Adjusting the height of the upper basket; To move to the higher position proceed as follows:
Operating instructions 22 With upper basket raised 22 cm 33 cm With upper basket lowered 26 cm 29 cm Maximum height of the dishes in: upper basket lower basket Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket af-ter moving the upper basket t...
Page 23 - Use of detergent
Operating instructions 23 Use of detergent Only use detergents specifically designed for use in dishwashers.Using no more then the correct amount of detergent contributesto reducing pollution.Prior to the start of a wash programme (not for the "Rinse andHold" programme). The detergent is rel...
Page 24 - Different kinds of detergent; Detergent tablets
Operating instructions 24 Different kinds of detergent Detergent tablets Detergent tablets of different brands dissolve at different speeds. Forthis reason some detergent tablets cannot dissolve and develop theirfull cleaning power during short programmes. Therefore please uselong programmes when us...
Page 25 - General advice
Operating instructions 25 Use of "3 in 1" combi detergents General advice These products are detergents with integrated and combineddetergent/rinse-aid and salt functions. 1. Before using these products you should first check that the water hardness in your supply is compatible with the use ...
Page 26 - Washing programmes
Operating instructions 26 Washing programmes (1) The consumption values were obtained under standardised conditions. They depend on how full the baskets for the dishes are. Variations are therefore possible in practice. (2) Testing programme for EN 50242 (see "Hints for Test Centres). This progr...
Page 27 - Starting a washing programme; Check that the baskets have been loaded; b) To select the delay start of the programme; b) If delay start has been setted
Operating instructions 27 Starting a washing programme In this fully integrated appliance the controls are located on the top ofthe door. When selecting a programme, the door needs to be open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on t...
Page 28 - To interrupt or cancel a washing programme; Open the door carefully.; To cancel a delay start in progress
Operating instructions 28 5. To interrupt or cancel a washing programme in progress Interrupt, or cancel a washing programme in progress ONLY if it’s absolutely necessary Attention! Hot steam may escape when the door is opened. Open the door carefully. Interrupt a washing programme in progress Open ...
Page 29 - End of the washing programme; open the; end of programme; Unloading the dishwasher
Operating instructions 29 7. End of the washing programme The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme. If the door is not immediately opened at the end of the programme, air will circulate inside the dishwasher to prevent residual stea...
Page 30 - Maintenance and cleaning; Cleaning the filters
Operating instructions 30 Maintenance and cleaning Clean the external surfaces of the machine and control panel with adamp soft cloth. If necessary use only neutral detergents. Never useabrasive products, scouring pads or solvent (acetone, trichloroethyleneetc....). Ensure that the seals around the ...
Page 32 - Prolonged periods of non-operation
Operating instructions 32 Prolonged periods of non-operation If you are not using the machine for any period of time you areadvised to: 1. Unplug the appliance and then turn off the water. 2. Leave the door ajar to prevent the formation of any unpleasant smells. 3. Leave the inside of the machine cl...
Page 35 - The dishes are not clean
Operating instructions 35 ...the wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arms do not rotate...
Page 36 - Service; Service and spare parts
Service 36 Service If after all these checks, the problem persists, contact your localService Force Centre, quoting the model (Mod.), product number (PNC)and serial number (S.N.). This information can be found on the rating plate located on the sideof the dishwasher door (see picture). So that you a...
Page 39 - Technical specifications
Operating instructions 39 Dimensions: Electrical connection: VoltageOverall powerFuse Water supply pressure: Capacity: Width 59.6 cm Height 86.8 - 94.8 cm Max depth 55.5 cm Max depth with open door 119 cm Information on the electrical connection is given on therating plate on the inner edge of the d...
Page 40 - Installation instructions; Levelling
Installation instructions 40 Installation instructions Any electrical and/or plumbing work required to install thisappliance should be carried out by a qualified electrician and/orplumber or competent person. Remove all packaging before positioning the machine.If possible, position the machine next ...
Page 41 - Water supply connections
Installation instructions 41 Water supply connections This dishwasher may be fed with either hot (max. 60°) or cold water.Nevertheless we advise you a cold water supply.A hot water supply is not always efficient with very soiled crockery asit shortens the washing programmes a lot.For making the conn...
Page 42 - Water inlet hose with safety valve; Please take care when installing the water inlet hose:
Installation instructions 42 Water inlet hose with safety valve After connecting the double-walled water inlet hose, the safety valveis next to the tap. Therefore the water inlet hose is only under pressurewhile the water is running. If the water inlet hose starts to leak duringthis operation, the s...
Page 43 - Water outlet hose connection
Installation instructions 43 Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into themachine. 2. Hooked over the edge of ...
Page 44 - Electrical connection
Installation instructions 44 Electrical connection Information concerning the electrical connection is given on therating plate on the edge of the dishwasher’s door. Before plugging the appliance into the wall socket, make sure that: 1. The mains voltage and current rating at the site of installatio...
Page 45 - Hints for test centres
Hints for test centres 45 Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see " Washing programmes " chart). Testing in accordance with EN 60242 must be carried out when the salt dispenser and rinse aid ...
