AEG 3531WKM- User Manual

Page 3 - Table of contents

3 Contents Page no For the user Safety information ........................................................................................ 4 Description of the product ......................................................................... 5 Placement of grid ........................................

Page 4 - Safety information

4 Safety information These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. Your safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistan...

Page 5 - Description of the product

5 Description of the product Burner Knob Placement of grid Guide knop for grid

Page 6 - Operatings instructions

6 Operatings instructions Burner markings The operating knob has a ring showing the scale of markings. Off. Max. flame Min. flame Ignition position

Page 8 - Ignitions

8 Ignitions 1. Depress and turn the control knob for the burner, the left to ignition position 2. The ignition electrode will emit sparks, and when the mixture of gas and air is correct, the burner will be ignited. Is not possible to connect the unit to mains, a match may be used to ignite the burne...

Page 9 - Cleaning and maintenance of

9 Cleaning and maintenance of For reasons of hygiene and safety, the cooking burner must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. The splashguard can be removed to make it easier to clean the surface. What to do:1. Hold the splashguard as sho...

Page 11 - Mounting

11 Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm. Headroom The distance to any shelves or tops of a cabinet under...

Page 15 - Technical data

15 Type of gas Natural, G-20 - 20mbar Category and pressures II 2H3+ 20 - 28/37 mbar Max. nominal load Q, H S : Wok burner = 3,9 kW x 1 Total= 3,9 kW FSD The unit features fully-secured gas taps(thermo-fuse). H S = Gross calorific value Q = Nominal load Voltage= 200 V AC Ignition transformer= 60 HZ ...

Page 16 - Service

16 Service Question: There is no spark when lighting the gas? When the operating knob is released the gas ring goes out again? The gas ring burns very unevenly?? Answer Check whether the 200 V connection has been plugged in. The ground fault circuit relay way have switched off. The fuse has blown Th...

Table of Contents:

Summary

Other AEG Models