Adesso 3200 series - Manual

Page 4 - Limited Warranty; DO NOT DISPOSE IN FIRE.

Note: This manual should only be used to make changes in the configuration of the scanner for specific applications. The NUSCAN 3200 Series scanners are ready to scan most kinds of barcodes. This laser barcode scanner does not require software or drivers to operate. The scanner enters data as keyboa...

Page 5 - Introduction

2. Introduction The NUSCAN 3200 Laser Barcode Scanner combines the best scanning performance and value. NUSCAN 3200 comes in multiple modes to handle any task. Its flexible architecture gives users different configurations to choose from, with different combinations of communications. With its rugge...

Page 6 - Contents; 0 Long Range; Barcode Symbologies; transportation, document processing and tracking, and libraries.

3. Contents The NUSCAN 3200 Long Range Laser Barcode Scanner package should contain: NUSCAN 3 2 00 Long Range User’s Guide Laser Barcode Scanner 4. Barcode Symbologies Barcodes are symbols consisting of a series of bars and spaces which can be applied to packages, cartons, bottles and other commerci...

Page 7 - Product Introduction; Buzzer; Installation; connector on the host as below described:; Host

5. Product Introduction Buzzer Handle Trigger Exit Window When a barcode is successfully decoded, the blue LED light of the scanner will turn on and off and the scanner will beep once. If the barcode is not successfully read, the LED will show red and the buzzer will not sound. 6. Installation Inser...

Page 8 - Maintenance; affect scanning accuracy.

c. Serial Port (RS-232) Connection NOTE: For Serial port (RS-232), please plug the power connector of 5V power adapter to RS232 cable. 1 Be sure that Host computer is turned off. 1. Ensure that all connections are secure. 2. Turn on your Host. 3. Aim the scanner at a barcode. Ensure that the scanner...

Page 9 - Scanning Mode Selection; Pulse Mode

7. Scanning Mode Selection Trigger Mode (Default) The scanner becomes inactive as soon as the data is transmitted. It must be triggered to become active again. Continuous Mode When set this code, laser light is always ON. Can read barcode continuously after code transmission. Pulse Mode When set thi...

Page 10 - Beeper Mode Selection; label turns all the parameters back to default values.

8. Beeper Mode Selection (Deafult) Reset Mode The reading of the "Reset Configuration to Defaults” label turns all the parameters back to default values. 7

Page 11 - Default Parameters

9. Default Parameters These tables give the default settings of all the programmable parameters. DEFAULT VALUES OF OPERATING PARAMETERS Function Default Values Scanning Mode Selection Trigger mode Message/Block mode selection Message Good read beeper tone selection On DEFAULT VALUES OF K/B PARAMETER...

Page 12 - Barcode Scan Field

10. Barcode Scan Field Depth of Field (Up to 42 cm): Based on Symbol’s Standard Code 39 PCS=0.9 lable and 600 lux environment and there are +/- 1 cm tolerance 9

Page 15 - Product Support

d. Problem: Scanned data is incorrectly displayed on the host. Possible Cause Possible Solution Scanner is not programmed to work with the host. Be sure proper host type is selected. For RS-232, ensure the scanner’s communication parameters match the host’s settings. For keyboard emulation configura...

Adesso 3200 series - Manual

Table of Contents:

Summary

Other Adesso Models