Addonics Technologies ZBW-10LS2EU - Manual
Addonics Technologies ZBW-10LS2EU – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – via USB2.0 connection; Installing PowerDVD from CyberLink Hi-Def Suite CD; Place the CyberLink BD Drive Solution CD to the BD / DVD-ROM Drive.; USB Driver
- Page 3 – Power DVD Main Menu; Configuration Icon
- Page 4 – LIMITED WARRANTY; NO EVENT SHALL ADDONICS’ LIABILITY EXCEED THE PRICE PAID FOR THE; Technical Support
Addonics
T E C H N O L O G I E S
Zebra Blu Ray & DVD±R/RW Writer
with eSATA and USB interface
ZBW-10LS2EU
User’s Guide
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a class B digital
device pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on and off, the user
is encouraged to try and correct the interference by one or more of the following
suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to a different power outlet other than the one where receiver is
connected
Consult a certified television or radio technician
Enclosure Overview
Rear View
Hardware Installation
1. Connect the power adapter to the power connector located at the back of the
enclosure.
2. Connect the data cable using
a. eSATA connection
Note: You should have configured the eSATA host controller on your
system before you connect the writer. Once the eSATA host controller is
configured, do the following steps below.
Plug-in the eSATA cable to the eSATA port on the enclosure and
attached the other end to your eSATA host controller.
b. Or USB2.0 connection
Attach the USB cable to the USB port on the enclosure and in your
system.
Screw 2
Fan
Switch
USB Port
eSATA Port
Power
Connector
Power LED
Drive Activity LED
Eject Button
Screw 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3. Power ON the enclosure using the switch on the back panel. You should see the Green Power LED on the front panel at the bottom right light up. 4. Go to Device Manager to check if your system detects the Blu Ray writer via eSATA connection via USB2.0 connection 5. The Blu-ray writer will also show...
To determine if your system is capable of playing Blu-ray Disk, install the CyberLink BD Advisor. Step 1. Click Install BD Advisor. Step 2. Run Advisor. Step 3. Click on Scan for Blu-ray Disk Support. If you have a similar scan result you might not be able to play Blu-ray Disk. System Requirement to...
The Help Window opens. LIMITED WARRANTY Addonics guarantees that every product is free from physical defects in material and workmanship during the warranty period specified for each product when used within the limits set forth in the Specifications section in the user guide. Unauthorized tampering...
