Addonics Technologies HDUSI325AES - Manual

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Functions The copy controller has 8 functions in total, with the th (Adv Setup) being a hidden system function that only appears when the ESC key is pressed for 2 seconds until the...

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Copy HDD Copy HDD copies data directly from the source hard disk to the target hard disk. Please make sure that the capacity of the target hard disk is equal or larger than the sou...

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ PreScan Source PreScan HDD is used to check if the source hard disk can be accessed properly. It also tests the read speed. Choose option 3 from the menu: 3. PreScan Source HDD : 1...

8. Setup Setup Setup allows various system settings to be changed. There are 12 sub-options: Language, Copy Size, Startup Menu, Auto Compare, Button Sound, Device Info, System Info, Fast Copy, Auto Start Drive, Auto Start Timer, Tolerance Size and Boot Time Delay. Choose option 8 from the menu: In P...

8-02. Setup Copy Size Press ENT and the LCD will display a detailed list of options as shown below Use the Up and Down arrow keys to choose different copy si zes. The system will offer their corresponding percentages so the user can specify the amount to copy from the source hard disk. Press ENT to ...

Device Info This option is used to display the details of all hard d isks connected to the copy controller. 8-07. Setup Device Info Press ENT and the LCD will display each hard disk' information in order as shown below. 0 Source CH: 0 Hitachi 232.9GB System Info This option displays system informati...

Adv Setup Adv Setup offers expert users access to more advanced system settings. To access this option, hold down the ESC key for two seconds until it appears. 10. Adv Setup Detect HDD Delay This function is used to set the time interval between the system's re-scans of all connected HDD devices.Pre...

All data will be lost,Erase? No Press ENT again and the LCD will prompt you to confirm the er ase operation. Test IDE 0/1 OK LCD Test Start Button Test ? SDRAM Test: 8192Kbytes OK FlashTest: OK Test finished Once the system diagnostics have been completed the "Test finished" message will app...

5. Source Size Source Size Source Size is used to show the capacity of the source. Choose option 5 from the menu: Press ENT and the LCD will show the following info. HDD:Hitachi Size:232.9GB Then press ENT and the LCD will show the data's size info. HDD:Hitachi Data:200.9GB 6. Secure Erase Secure Er...

Press ENT to enter the following screen. Use the Up and Down bu defaults. Load Default Load Default Ok If Load Default OK, this will be displayed on the LCD as shown below. Load Default Press ESC to return to the main menu then use the ENT button to select. This function resets all settings to their...

Basic Troubleshooting LCD If the LCD blank after the device is turned on, check that the power cable is properly connected and that the power supply is on. Error Message When the system is running a copy operation or hardware diagnostics, if the operation is manually terminated by pressing ESC an er...

Error Messages List NO# Error Messages Description Applied to 1 Source Drive Not Exist! during operating Copy, Async Copy, Compare, Async Compare, PreScan Source, Source Size, Copy Size, Tolerance Size 2 User Abort! Cancel operating 3 No Drive Exist operating Device Info 4 X Space Not Enough Target ...

www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/ CONTACT US Firmware Update Procedure (Requires one hard drive containing the firmware file): 1. Create a 50MB HDD partition with FAT/FAT32 or NTFS files system on any SATA hard drive 2. Download the fi...