Addonics Technologies AEUDMACFWP - Manual
Addonics Technologies AEUDMACFWP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
ADDONICS TECHNOLOGIES
Model:
AEUDMACF, AEUDMACFWP (read-only)
Step 1
Mount the IDE-CF Adapter
PRO on a 3.5” drive bay.
Step 2
Connect a 4-pin Molex power cable from the PC power supply to
the 4-pin Molex power connector on the IDE-CF Adapter
PRO.
Step 3
By default, the IDE-CF Adapter
PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 4
Connect 40-pin IDE connector to IDE controller on motherboard
using IDE flat cable.
Note:
The IDE-CF Adapter
PRO supports hot swap.
TECHNICAL SUPPORT
(8:30 am to 6:00 pm PST)
Phone:
408 453-6212
Email:
http://www.addonics.com/support/query/
ADDONICS TECHNOLOGIES
Model:
AEUDMACF, AEUDMACFWP (read-only)
Step 1
Mount the IDE-CF Adapter
PRO on a 3.5” drive bay.
Step 2
Connect a 4-pin Molex power cable from the PC power supply to
the 4-pin Molex power connector on the IDE-CF Adapter
PRO.
Step 3
By default, the IDE-CF Adapter
PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 4
Connect 40-pin IDE connector to IDE controller on motherboard
using IDE flat cable.
Note:
The IDE-CF Adapter
PRO supports hot swap.
TECHNICAL SUPPORT
(8:30 am to 6:00 pm PST)
Phone:
408 453-6212
Email:
http://www.addonics.com/support/query
4-Pin Molex
Power Connector
CF/MD Slot
Master or Slave
Setting
40-Pin IDE
Connector
Power & drive
activity LED
4-Pin Molex
Power Connector
CF/MD Slot
Master or Slave
Setting
40-Pin IDE
Connector
Power & drive
activity LED
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
