Addonics Technologies ADCB2SA-E - Manual
Addonics Technologies ADCB2SA-E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
ADDONICS TECHNOLOGIES
ADCB2SA-E (Serial ATA CARDBUS Co ntroller Card)
Please use our on-line registration card for your Warranty registration. Our web site is www.addonics.com
SPECIFICATIONS
Chip Set:
Silicon Image integrated host controller
Interface:
CARDBUS
I/O Ports:
(2) external Connectors
Regulatory approvals: FCC, CE
Features:
•
Supports High Speed Transfer Rate
1,500Mbps, Compare with 480Mbps of
USB2.0 and 400Mbps of 1394a
•
48 bits LBA can Break Capacity-Limit to
Support HDD larger than 137GB
•
Two SATA2 Shield ing & Durable
connectors (eS ATA)
•
PC Card 32 bit CardBus ful ly compliant
•
Dual high speed Serial ATA interface ports,
each supporting 1st generation Seri al ATA
data rates 1.5Gb/s
•
Fully compliant with Serial ATA 1.0a
specifications
•
Supports Spread Spectrum in receiver
•
Independent 256-byte FIFOs (32 bit * 64
deep) per Seri al ATA channel for host reads
and writes
System Requirements:
•
Pentium or equivalent PC with one available
CARDBUS slot
•
Windows 98SE/ME/NT/2000/XP
Package contents:
•
CardBus Serial ATA adapter
•
Driver Disc
•
This Quick User guide
INSTALLATIONS
Hardware Installations:
1.
Power OFF Computer.
2.
Select an empty Cardbus/PCMCIA slot and
insert the Serial ATA CardBus card.
3.
Turn PC ON.
4.
Follow the Wizard for driver insta llati on.
Software Installation:
Windows 98SE, Me, 2000, XP Driver Installations
1.
Turn computer ON. When Windows boots
up, “A New Hardware Found” pops on the
screen and the Addonics Serial ATA
CARDBUS Controller is ident ified.
2.
At the “Add New Hardware Wizard
Window, click “Next”
3.
Choose “Select for the best dr iver for your
devices”, and click “Next”
4.
Insert the Drivers Diskette or Driver Disc
and check the “Floppy Drive or CDROM
Drive” option. Click “Next”
5.
If using a driver that has not been digitally
signed by Microsoft, you will be asked if
you want to continue the instal lation. Click
Continue.
6.
When the new hardware wizard has finish
install ing the Serial ATA card. Click
“Finish” t o complete the installations.
Confirming Serial ATA Driver Installation
1.
Right click the My Computer icon and select
properties.
2.
Click Device Manager in the Menu Tree.
3.
Click the “+” sign in front of PCMCIA
Socket. Addonics or Sili con Image SATA
controller should appear.
TECHNICAL SUPPORT
Addonics Technologies
2466 Kruse Drive
San Jose CA 95131
Phone:
408 433-3899
Fax:
408 433-3898
Email:
Internet:
http://www.addonics.com
Technical Support
(8:30 am to 5:30 pm PST)
Phone:
408 433-3855
Email:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
