A&D SK-30KWP - Manual - manualsarea.com

Page 2 - SAFETY PRECAUTIONS

- 1 - SAFETY PRECAUTIONS All safety messages are identified by the following, “ WARNING ” or “ CAUTION ”, of ANSI Z535.4 (American National Standard Institute: Product Safety Signs and Labels). The meanings are as follows: WARNING A potentially hazardous situation which, if not avoided, could result...

Page 3 - PARTS DESCRIPTION; DISPLAY

- 2 - PARTS DESCRIPTION DISPLAY Weighing unit for (k)g-lb model only. Weighing Platform Spirit level Display ON/OFF key Turns the scale power on/off. UNITS key (only for (k)g- lb model) Changes weighing units, (k)gor lb. RE-ZERO key Sets display to zero or subtracts weight of a container. Four level...

Page 4 - PREPARATION; Installing Batteries / Connecting the AC Adapter; Installing Batteries; CAUTION When replacing batteries, be careful; Setting up the Scale; CAUTION

- 3 - PREPARATION Installing Batteries / Connecting the AC Adapter Installing Batteries CAUTION When replacing batteries, be careful not to apply too much force to the weighing platform. An excessive force could damage the scale. Unlock and remove the battery cover. (See illustration at the right) I...

Page 5 - WEIGHING; Before Weighing; poff0; Weighing Procedures; Start

- 4 - WEIGHING Before Weighing Automatic Power-Off Function. If the scale is left ON and the stable indicator is displayed, the automatic power-off function turns the power off after approximately five minutes (factory setting). To disable or enable the function, press the [ON/OFF] key while pressin...

Page 6 - CALIBRATION; When to Calibrate; The Position of the [UNITS] key for the Calibration; Calibration Using a Calibration Weight; Cal; Zero; Calf; Span; end

- 5 - CALIBRATION When to Calibrate Calibration may be required when the scale is initially installed, if it is moved a substantial distance, or in accordance with local regulations. This is necessary because the weight of a mass in one location is not necessarily the same in another location. Also,...

Page 7 - Calibration by Gravity Compensation; at the factory. If the gravity

- 6 - Calibration by Gravity Compensation If you have calibration weights at the capacity of the scale, you can calibrate the scale with the weights instead of compensating for the gravity acceleration. The scale is calibrated at 9.798 m/sec 2 at the factory. If the gravity acceleration at your loca...

Page 8 - SPECIFICATIONS; The Value of Gravity at Various Locations

- 7 - SPECIFICATIONS Model SK-1000WP SK-2000WP SK-5000WP SK-5001WP SK-10KWP SK-20KWP SK-30KWP Capacity 1000 g 2.2 lb 2000 g 4.4 lb 5000 g 11 lb 5000 g --- 10 kg 22 lb 20 kg 44 lb 30 kg 66 lb Resolution 0.5 g 0.001 lb 1 g 0.002 lb 2 g 0.005 lb 1 g --- 0.005 kg 0.01 lb 0.01 kg 0.02 lb 0.02 kg 0.05 lb ...

Page 9 - World Map