Page 3 - iii; Information for Your Safety and; Turning the product off before cleaning
iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid clea...
Page 4 - iv; Using electrical power
iv • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical powe...
Page 7 - vii; Caution for Listening; Disposal instructions
vii Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level after your ears have adjusted. • Do not listen to music at high volumes for extended periods. • Do not increase...
Page 8 - viii; First Thing First; Usage Notes; Precautions
viii First Thing First Usage Notes Do : • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't : • Block the slots and openings...
Page 9 - Contents
Information for Your Safety and Comfort iii First Thing First viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 4 Remote Control Layout 5 Getting Started 7 Connecting the Projector 7 Turning the Projecto...
Page 10 - Regulations and safety notices
Troubleshooting 34 LED & Alarm Definition Listing 38 Replacing the Lamp 39 Ceiling Mount Installation 40 Specifications 43 Compatibility Modes 45 Regulations and safety notices 49
Page 11 - Introduction; Product Features
1 Eng lis h Introduction Product Features This product is a single-chip DLP ® projector, including the following outstanding features: • DLP ® technology • S5201M/T111B/PS-X11M: Native 1024 x 768 XGA resolutionP5403/N243/PN-SX12: Native 1400 x 1050 SXGA+ resolution4:3 / 16:9 aspect ratio supported •...
Page 12 - English; Package Overview
2 English Package Overview This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing. Projector with lens cap Power cord VGA cable Composite video cable Security card User’s guide (CD-ROM) Remote control Quick s...
Page 13 - Projector Overview; Projector Outlook; Rear side
3 Eng lis h Projector Overview Projector Outlook Front / upper side Rear side # Description # Description 1 Power key and Power indicator LED 5 Control panel 2 Projection lens 6 Zoom ring 3 Elevator button 7 Focus ring 4 Lens cap 8 Remote control receiver # Description # Description 1 Remote control...
Page 14 - Control Panel
4 English Control Panel # Function Description 1 LAMP Lamp indicator LED 2 POWER Power indicator LED 3 Power key Refer to the "Turning the Projector On/Off" section. 4 Keystone Adjusts image distortion caused by tilting projection (±40 degrees). 5 MENU • Launches the Onscreen Display (OSD) m...
Page 15 - Remote Control Layout
5 Eng lis h Remote Control Layout # Function Description 1 Infrared transmitter Sends signals to the projector. 2 POWER Refer to the "Turning the Projector On/Off" section. 3 FREEZE To pause the screen image. 4 RESYNC Automatically synchronizes the projector to the input source. 5 BACK Goes ...
Page 17 - Getting Started; Connecting the Projector
7 Eng lis h Getting Started Connecting the Projector • P5403/N243/PN-SX12 Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. # Description # Description 1 Power cord 7 RS232 cable 2 VGA cable 8 HDMI cable 3 V...
Page 19 - Turning the Projector On/Off; Turning On the Projector
9 Eng lis h Turning the Projector On/Off Turning On the Projector 1 Remove the lens cap. 2 Ensure that the power cord and signal cable are securely connected. The Power LED will light red. 3 Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED...
Page 20 - Turning Off the Projector
10 English Turning Off the Projector 1 To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process."Press the power button again. 2 The LED power indicator will turn RED and blink rapidly after the projector i...
Page 21 - Adjusting the Projected Image; Adjusting the Height of the Projected Image
11 Eng lis h Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with an elevator foot for adjusting the image height. To raise the image: 1 Press the elevator button. 2 Raise the image to the desired height angle, then release the button to lock the e...
Page 22 - How to Optimize Image Size and Distance
12 English How to Optimize Image Size and Distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • P5403/N243/PN-SX12 If the projector is 3 m from the screen, good image quality is possible for image sizes b...
Page 24 - How to Get a Preferred Image Size by Adjusting
14 English How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • P5403/N243/PN-SX12 To obtain an image size of 50" set the projector at a distance between 1.5 m and 2.0 m fro...
Page 26 - User Controls; Installation Menu
16 English User Controls Installation Menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen.1 Turn on the projector by pressing (POWER) on the control panel or r...
Page 27 - Acer Empowering Technology; Empowering Key
17 Eng lis h Acer Empowering Technology Empowering Key Acer Empowering Key provides three Acer unique functions: "Acer eView Management", "Acer eTimer Management", "Acer eOpening Management" and "Acer ePower Management". Press " " for more than one second to l...
Page 29 - Color
19 Eng lis h Color Display Mode There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation with higher brightness. • Standard: For common environment. • Video: For playing video in a bright environment. • Educ...
Page 31 - Image
21 Eng lis h Image Projection • Front-Desktop: The factory default setting. • Front-Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. • Rear-Desktop: When you select this function, the projector reverses the image so that you can project behind a...
Page 33 - Setting
23 Eng lis h Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video mode. Note: "Sharpness" function is not supported under computer mode. Note: The 3D function is supported by VGA source only. Please see the tim...
Page 41 - Management
31 Eng lis h Note 5: Other notes about using the pen1. Avoid standing too far from the screen. The closer you are to the screen, the better performance the pen has. 2. Hold the pen the way you hold a remote control or a pen.3. A full battery charge takes 6-8 hours and will allow 20-40 hours non-stop...
Page 42 - Audio
32 English Audio Volume • Press to decrease the projector speaker volume. • Press to increase the projector speaker volume. Microphone Volume(for S5201M/T111B/PS-X11M) • Press to decrease the microphone volume. • Press to increase the microphone volume. Mute • Choose "On" to turn mute on. • ...
Page 43 - Timer
33 Eng lis h Timer Language Timer Location Sets the location of the timer on the screen. Timer Start (or Stop) Press to start or stop the timer. Timer Period (Minutes) Press to adjust the timer period. Timer Volume Select this function to adjust the notification volume when the timer function is ena...
Page 44 - Appendices; Troubleshooting; Image Problems and Solutions
34 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears onscreen • Make ...
Page 48 - LED & Alarm Definition Listing; LED Messages
38 English LED & Alarm Definition Listing LED Messages Message Power LED Lamp LED Temp LED Red Blue Red Red Standby(Power cord plugged in) V -- -- -- Power on -- V -- -- Lamp retry -- Quick flashing -- -- Turning off (Cooling state) Quick flashing -- -- -- Turning off (Cooling completed) V -- --...
Page 49 - Replacing the Lamp
39 Eng lis h Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp.The projector will detect the lamp life itself. It will show you a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!&#...
Page 50 - Ceiling Mount Installation
40 English Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws f...
Page 53 - Specifications
43 Eng lis h Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation. Projection system DLP ™ Resolution • P5403/N243/PN-SX12: Native: SXGA+ (1400 x 1050)Maximum: 1920 x 1080 EIA/RB • S5201M/T111B/PS-X11M: Native: ...
Page 55 - Compatibility Modes; VGA Analog - PC Signal
45 Eng lis h Compatibility Modes 1 VGA Analog - PC Signal Mode Resolution V.Frequency [Hz] H.Frequency [KHz] VGA_60 640 x 480 59.940 31.469 VGA_72 72.809 37.861 VGA_75 75.000 37.500 VGA_85 85.008 43.269 VGA_70 720 x 400 70.087 31.469 VGA_85 85.039 37.927 SVGA_56 800 x 600 56.250 35.156 SVGA_60 60.31...
Page 58 - Component Signal
48 English 3 Component Signal 4 Video, S-Video Signal 1080p 60 67.5 1080P 50 56.26 1080p 24 27.00 1080p 23.98 26.97 Mode Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720 x 480 59.94 15.73 480p 720 x 480 59.94 31.47 576i 720 x 576 50.00 15.63 576p 720 x 576 50.00 31.25 720p 1280 x 720 60.00 45....
Page 60 - Remarque à l'intention des utilisateurs canadiens
50 English Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevan...
Page 61 - List of applicable countries
51 Eng lish Eng lis h List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the...
Page 62 - Declaration of Conformity
52 English Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, TaiwanContact Person: Mr. Easy Lai, e-mail:[email protected] And, Acer Europe SAVia Cantonale,...
Page 64 - Federal Communications Commission
54 English Acer America Corporation 333 West San Carlos St., San Jose CA 95110, U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditio...
