Acer R230H- User Manual

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.
1 To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.

3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this

range may result in permanent damage.

6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Package contents

LCD

monitor

Quick start

guide

VGA

cable

AC

Adapter

AC Power

cord

HDMI cable

(Optional)

DVI cable

(Optional)

Audio cable

(Optional)

MHL cable

(Optional)

Adjusting the monitor base

1 Carefully remove the monitor from its packaging.

• The monitor base is attached onto the monitor before shipment and it is undetachable.

2 Pull the monitor base out fully so that the monitor can be placed on a stable surface in the upright position.

3

Secure the monitor base by turning the white screws (at the bottom of the base) using the integrated tab or a suitable coin.

Connecting your monitor to a computer

1 Turn off your computer and unplug your computer’s power cord.

2 Connect the signal cable to the VGA and/or DVI-D (optional) and/or

HDMI input socket of the monitor, and the VGA and/or DVI-D (optional)

and/or HDMI output socket of the graphics card on the computer.

or connect MHL cable(Only for MHL-Input Model)(Optional) to the

portable device.Then tighten the thumbscrews on the signal cable

connector.

3 Connect one end of the adapter to the monitor and the other end to a

properly grounded, AC outlet.

4 Plug the power cords of your computer and your monitor into a nearby

electrical outlet.

5 Connect the audio cable.

Connect an audio cable to the audio port of the monitor.

Panel controls

No.

Item

Description

1

Power button/

indicator

Turns the monitor on/off. Blue indicates power

on. Blinking blue indicates standby/power saving

mode.

2

<

/

>

button

Press the

<

/

>

button to navigate to the desired

function or to change the settings of the current

function.

3

Menu/Enter

button

Press to view the OSD menu. Press it again to

enter a selection in the OSD menu.

4

Auto/Exit button

• When the OSD menu is active, press this

button to exit the OSD menu.

• When the OSD menu is inactive, press

this button to activate the Auto Adjustment

function.

5

Empowering

Key

Press this button to open the Acer eColor

Management OSD and access the scenario modes.

VGA IN

DVI-IN

HDMI

AUDIO IN

DVI

HDMI

VGA

AUDIO IN

VGA

DVI

HDMI

DC IN

H D M I

H D M I

Note: MHL input only works for the MHL-certified device. Please

check user manual for more instruction.

1

2

3

4

5