Acer PD723- User Manual

Page 2 - Usage Notice; Precautions; Follow all warnings, precautions and maintenance as recom-

2 English ... Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp ison. The bright light may hurt your eyes. Warning- To reduce the risk of fire...

Page 4 - Product Features; This product is an XGA single chip 0.7” DLP; Outstanding features include:; Introduction

4 English ... Product Features This product is an XGA single chip 0.7” DLP TM projector. Outstanding features include: True XGA, 1024 x 768 addressable pixels Single chip DLP TM technology NTSC 3.58/NTSC4.43/PAL/SECAM and HDTV compatible (480i/p, 576i/p, 720p, 1080i) HDCP Compliant High-te...

Page 5 - Package Overview; This projector comes with all the items shown below.

5 ... English Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Power Cord 1.8m VGA Cable 1.8m Remote Control with Mouse Function & Laser Pointer 2 x Battery Audio C...

Page 6 - Main Unit; Product Overview

6 English ... Main Unit Product Overview 1. Remote Control Receiver 2. Zoom Lens 3. Elevator Button 4. Elevator Foot 5. Focus Ring 6. Zoom Ring 7. Power Socket 8. Connection Ports 9. Control Panel Introduction 3 4 9 1 9 1 2 8 7 3 5 6 Downloaded From projector-manual.com Acer Manuals

Page 7 - Control Panel

7 ... English Control Panel 1. Temp Indicator LED 2. Power Indicator LED 3. Lamp Indicator LED 4. Power/Standby 5. Source 6. Four Directional Select Keys 7. e-Key (Empowering Key) 8. Keystone Correction 9. Re-sync 10. Menu Introduction 4 3 6 2 1 5 7 8 9 8 1 0 Downloaded From projector-manual.com Ace...

Page 8 - Connection Ports

8 English ... Introduction Connection Ports 1 2 3 4 5 1 0 9 8 1. DVI-I Input Connector (PC Digital and Analog signal/HDTV/ HDCP/Component Video Input ) 2. VGA Connector (PC Analog Signal/HDTV/Component Video Input) 3. USB Input Connector 4. RS232 Input Connector 5. Monitor Loop-through Output Connec...

Page 10 - Connecting the Projector; Installation

10 English ... 1 . . DVI to D-Sub Cable 2 . . VGA Cable 3 . . Composite Video Cable 4 . . 3 RCA Component Cable 5 . . S-Video Cable 6 . . Audio Cable Jack/Jack 7 . . Audio Cable Jack/RCA 8 . . USB Cable 9 . . DVI to DVI Cable (Optional Accessory) 1 0 .RS232 Cable (Optional Accessory) Connecting the ...

Page 11 - Powering On the Projector; red; Powering On/Off the Projector

11 ... English Installation Power/Standby Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will turn red . 3. Turn on the lamp by pressing “Power/Standby” button on the control panel. n The startup screen will disp...

Page 12 - Warning Indicator; Powering Off the Projector; Please press power button

12 English ... Installation Warning Indicator When the “TEMP” indicator turns red, it indicates the projector has overheated. The projector will automatically shut itself down. See page 32. When the “LAMP” indicator flashes red (0.5 second intervals) , it indicates a problem with the lamp. Turn ...

Page 13 - Adjusting the Projected Image; Adjusting the Projector Image Height; The projector is equipped with an elevator foot for adjust-

13 ... English Adjusting the Projected Image Adjusting the Projector Image Height Elevator Foot 1 2 3 The projector is equipped with an elevator foot for adjust- ing the image height. To raise the image: 1. Press the elevator button n . 2. Raise the image to the desired height angle o , then release...

Page 14 - Adjusting the Projector Zoom / Focus; Adjusting Projection Image Size

14 English ... Adjusting the Projector Zoom / Focus You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters). Adjusting Projection Image Size Installation Max. 29...

Page 15 - User Controls; Control Panel & Remote Control; There are two ways for you to control the functions: Remote; Remote Control; Source

15 ... English User Controls Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Remote Control Control Panel Using the Control PanelPower/Standby 4 Refer to the “Power On/Off the Projector” section on pages 11-12. Source 4 Press ...

Page 18 - How to operate; On Screen Display Menus

18 English ... The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. Theprojector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the RemoteControl or Control Panel. 2. When OSD ...

Page 19 - Color; Display Mode; Brightness

19 ... English Color Display Mode There are many factory presets optimized for various types ofimages. 4 PC : For computer or notebook. 4 Video : For playing video in a bright environment. 4 Theatre : For Home Theatre usage in a dark room. 4 User : Memorize user’s settings. Brightness Adjust the bri...

Page 21 - Image

21 ... English Sharpness Adjusts the sharpness of the image. 4 Press the to decrease the sharpness. 4 Press the to increase the sharpness. V. Keystone Press the or to adjust image distortion vertically and makes a squarer image. H. Keystone Press the or to adjust image distortion horizontally and ma...

Page 22 - Frequency

22 English ... Image User Controls H.Position (Horizontal Position) 4 Press the to move the image left. 4 Press the to move the image right. V. Position (Vertical Position) 4 Press the to move the image down. 4 Press the to move the image up. Frequency “Frequency”changes the display data frequency t...

Page 23 - Projection; Management

23 ... English ECO Mode Choose “On” to dim the projector lamp which will lower powerconsumption, extend the lamp life and reduce noise. Choose”Off” to return normal mode. Menu Location Choose the Menu location on the display screen. Projection 4 Front-Desktop The factory default setting. 4 Rear-Desk...

Page 25 - Audio; Volume

25 ... English Audio Volume 4 Press the to decrease the volume. 4 Press the to increase the volume. Mute 4 Choose the “On” to turn mute on. 4 Choose the “Off” to turn mute off. User Controls Downloaded From projector-manual.com Acer Manuals

Page 26 - Personals

26 English ... Personals Edits user preferences by OSD interface. Edited user Info willdisplay on lower left corner of the screen when projector ispowered ON. 1.> Use the to select “Line1” function, and then press the “Enter” button. You can input the character to line one. 2.> Use the to sele...

Page 27 - Language

27 ... English Language Language Choose the multilingual OSD menu . Use the or key to select your prefered language.Press “Menu” to finalize the selection. User Controls Downloaded From projector-manual.com Acer Manuals

Page 28 - PIP; Position; Source Change; Swap

28 English ... PIP PIP Choose “On” to select on the PIP screen. Position Choose the PIP screen position on the display screen. Source Change Choose the input source of the projector on the PIP screen. Swap Choose “On” to swap main screen and PIP screen each other. User Controls Downloaded From proje...

Page 29 - Troubleshooting; If you experience trouble with the projector, refer to the; Appendices

29 ... English Problem: No image appears on screen. 4 Ensure all the cables and power connections are correctly andsecurely connected as described in the “Installation” section. 4 Ensure the pins of connectors are not crooked or broken. 4 Check if the projection lamp has been securely installed. Ple...

Page 32 - Problem: Message Reminders

32 English ... Problem: Message Reminders 4 “Lamp is approaching the end of its useful life in full poweroperation. Replacement Suggested!” will be shown about 10 seconds when lamp life is going to deplete. 4 “Projector Overheated. Lamp will automatically turn off soon.”will be shown when the system...

Page 33 - Replacing the lamp; Lamp Changing Procedure:

33 ... English Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp life exceed” When you see this message, changing the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. War...

Page 34 - Specifications

34 English ... Specifications The specs specified below are subject to change without notice. Regarding the final specs, please refer to Acer accounced marketing specs. Appendices Light Valve - Single Chip DLP TM Technology by Texas Instruments Lamp - 250W (PD723P) / 300W (PD725P) User Replaceable L...

Page 35 - Compatibility Modes

35 ... English VES A V GA 640 x 350 70 31.5 70 31.5 VES A V GA 640 x 350 85 37.9 85 37.9 VES A V GA 640 x 400 85 37.9 85 37.9 VES A V GA 640 x 480 60 31.5 60 31.5 VES A V GA 640 x 480 72 37.9 72 37.9 VES A V GA 640 x 480 75 37.5 75 37.5 VES A V GA 640 x 480 85 43.3 85 43.3 VES A V GA 720 x 400 70 31...

Table of Contents:

Summary

Other Acer Models