Acer PalmPro 7763PS- User Manual

Page 2 - Monitor Information; Telephone

Copyright Copyright © 2001 by Acer Communications & Multimedia Inc.. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanica...

Page 4 - Table of Contents

Table of Contents Introduction ..................................................................... 1 Projector Features .......................................................... 1 Description .................................................................. 2 A FRONT (figure) ......................

Page 5 - Projector Features

English 1 A B C D E F Introduction 1 Projector Features Image Resolution Fully compatible with true SVGA(63PS) and supports XGA using advanced intelligent compression technology. The advanced intelligent compression technology enables it to present clear compression SVGA/XGA images without line omis...

Page 6 - Description

G H A Ceiling Mount and Rear Screen Projection The projector is equipped with a full mirror scan conversion function (vertical/horizontal mirror), which allows the image to be reversed for ceiling mounting as well as for rear projection applications. AV box An AV box is optional, and users can attac...

Page 7 - Installation; Positioning; This projector is basically designed to project on a flat

Figure 2 Rear view of 7763PS C BOTTOM (figure) Figure 3 Bottom view of 7763PS Installation A. • • • Positioning This projector is basically designed to project on a flat projection surface. This projector can be focused from 1.5m–10m. Refer to the figure below to adjust the screen size. English 3

Page 8 - Adjustable Feet; Picture tilt and projection angle can be adjusted by twisting; Figure 5 Adjustable feet; Moving the Projector; Use the carrying handle when moving the projector.

47 " 62 " 77.2 " 9 2. 4" 1 07. 5" 122 .7" 13 7.9 " 153 " 18 3. 4 " 2 13. 7" 24 4. 1" 2 74. 4" 3 04 . 8" S c r eenS iz e Di st a nc e 1. 5 2 2. 5 3 3.5 4 4. 5 5 6 7 8 9 10 Figure 4 Positioning of 7763PS B. Adjustable Feet Picture tilt and projection...

Page 9 - Figure 6 Moving the projector; Accessories

Figure 6 Moving the projector Accessories Please check and make sure your box contains everything listed below. If any pieces are missing, contact your dealer. Please save the original box and packing materials in case you ever need to ship the unit. English 5

Page 10 - an

15 pin D - sub con nec to r P S/ 2 Mo use ad apt er Bat t er i es M an ua l U ser 's m anu al P ro je cti onLe ns R em ot e C on tr ol + Figure 7 Accessories of 7763PS English 6

Page 11 - Connection; Connecting the Projector to Computer/Notebook; Figure 8 Connection to PC

English 7 A Connection 2 Connecting the Projector to Computer/Notebook Figure 8 Connection to PC Figure 9 Connection to notebook

Page 12 - Operation; Turn On/Off Procedure; Power on; minute to cool the; External Control; Control Pad; Figure 10 External control pad

English 8 A B A Operation 3 Turn On/Off Procedure Power on Press the Standby/On key to turn on the lamp. The LED will blink green during warm up and then light solid green. "INPUT SIGNAL DETECTED, ACTIVATING AUTO IMAGE" will be displayed on the screen after the projector has identified the i...

Page 13 - To call the OSD menu.; Exit; To turn the projection lamp on and off.

MAIN UNIT FUNCTION Menu To call the OSD menu. To enter sub pages. To select items. 4 To navigate through sub pages or to increase the scale bar number. 3 To navigate through sub pages or to decrease the scale bar number. Exit To exit from the current page or OSD menu, and save setting changes. Stand...

Page 14 - Remote Control; Figure 11 Remote control; Main Unit; Freeze

B Remote Control P o we r P o we r Z o o m I n Z o o m I n Z o o m O u t Z o o m O u t F r e ez e F r e ez e R e t u r n R e t u r n C h a n ne l U p / D o w n Ch u p Ch d o w n Re v e r s e Re v e r s e S o ur c e Vo l um e S o ur c e 1 2 3 7 8 9 4 5 6 S c a n 0 1 0 0 A d d / E ra s e A d d / E ra ...

Page 15 - Source; Selects the input source.; Volume; To leave current OSD Pages.; Inserting Batteries in the Remote Control; Push and slide the lid in the direction of the arrow.; Figure 12 Battery replacement process; Remote Control Range

To select items. Source Selects the input source. Volume Adjusts volume. The sound gets louder or quieter by pressing the "+" or "-" button. Exit To leave current OSD Pages. 34 To move Left/Right among OSD items. Inserting Batteries in the Remote Control Be sure to follow instruction...

Page 16 - Figure 13 Range; Usage and Replacement of Lamp; The light source lamp has a limited service life.; A Lamp/temperature Status LED Indicator; Lamp in excess of service hours

Figure 13 Range Usage and Replacement of Lamp The light source lamp has a limited service life. The picture will become dark or the color will fade after the lamp has been used for a long time. In such cases, continued use of the lamp could cause a malfunction. Replace the lamp with a new one. A Lam...

Page 18 - B Replacing the Lamp; Replacing the lamp

B Replacing the Lamp Replacing the lamp When replacing the lamp, turn off the projector and unplug the AC cord. Wait 45 minutes so that the lamp can cool. High-pressure lamp when hit, may explode if improperly handled. Caution: • • • • Dispose of used lamps in accordance with local authorities. As t...

Page 19 - Lamp Replacement Procedure; Step 1; Lamp replacement

Lamp Replacement Procedure Step 1 Step 2 Step 3 Figure 17 Lamp replacement : Step 1, Step 2, Step 3 English 15

Page 20 - OSD; Press the “Menu” key again to enter

Resetting Lamp Timer If replacing the lamp after 1500 hours of operation, please carry out the following operation within 10 minutes of powering on. OSD FUNCTION Press the MENU button into OSD menu, and use “ 4 ” (KEYSTONE+) or “ 3 ” (KEYSTONE-) to select the Control page. Then press the Menu button...

Page 21 - A Display Page; Press the “Menu” button again to scroll through the items press “; Setting effects; Source is PC

Subpage Display Image Control Display Image Control Source Display Image Control Source A Display Page When a PC is the input source, there will be only four items on this page: Keystone, Brightness, Contrast, and Color Balance (Fig. 21). On the other hand, when the input source are video, S-video, ...

Page 22 - Contrast; Source is Video

Brightness (Dark) (Bright) Contrast (Lower) (Higher) Color Balance (Red) (Blue) Sharpness (Soft) (Sharp) Source is Video English 18

Page 23 - Image Page; The Auto Image should be turned off to activate the H.

B Image Page Select the Image sub-page and the first item, “Auto Resize” will be highlighted. There are five items on this page: Auto Resize, H. Phase, H. Size, H. Position, and V. Position (Fig. 23). If AV box is attached and the input is from Video other instead of PC, another different IMAGE sub-...

Page 24 - Image Ratio; Tint may not be adjusted with PAL/SECAM video signal input; C Control Page; Figure 25 Control sub-page

Position item. Position adjustments are saved when the projector is power off. V. Position (move the image down) (move the image up) Position adjustments are saved when the projector is power off. Image Ratio 4:3 (Normal) 16:9 (Wide) System To select the input video system standard. When an AV box o...

Page 25 - Source Page; Items

Language To select the OSD menu language. Eight languages are supported: English, French, German, Italian, Spanish, Swedish and Dutch. (See Figure 25). Mirror To select Normal projection, H-Invert projection, V-Invert projection, or H/V Invert projection. Blank To select the background color when th...

Page 26 - Other Correspondent Remote Functions and Messages; OSD FUNCTION

Other Correspondent Remote Functions and Messages OSD FUNCTION Source The selected source will be displayed at the bottom right of the screen for 3 seconds after selecting the source. (PC, VIDEO, S-VIDEO). Freeze The image will be frozen when the “Freeze” button is pressed. A “ ∥ ” mark appears at t...

Page 27 - Maintenanceand Troubleshooting; Lamp Replacement; Cleaning the Lens; PROBLEMS

English 23 A B C Maintenanceand Troubleshooting Lamp Replacement Refer to Page 11 Cleaning the Lens Follow these steps to clean the projection lens: 1. Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth (abrasive cleaners, solvents or other harsh chemicals might scratch the lens)...

Page 28 - NO SOUND; Adjust audio source.

the control pad. NO SOUND Check audio cable connection from audio input source. Adjust audio source. Press “Volume” (+) button. Press “Mute” button. English 24

Page 29 - Optical; DMD; Lens Fixed zoom ,manual focus; Electrical; Operational Temperature projector: 10 to 40

English 25 A B C 5 Specifications Optical DMD TM 1-chip 0.7” DMD TM (Digital Micromirror Device) Lens Fixed zoom ,manual focus (F=2.7 f=23) Lamp mercury lamp 150W Image size 45” to 300” Projection Distance 1.5 to 10 M Contrast Ratio 450:1 Electrical Inputs RGB(H:31.47 to 68.70 kHz V:56.25 to 85.00 H...

Page 30 - D Preset Display Resolution Table; Resolution

D Preset Display Resolution Table Resolution H Sync (kHz) V Sync (kHz) Remark 640x350 31.5 70.1 640x400 37.9 85.1 VESA 720x400 31.5 70.0 720x400 37.9 85.1 VESA 640x480 31.5 60.0 VESA 640x480 37.9 72.8 VESA 640x480 35 66.7 Macintosh 640x480 43.3 85.0 VESA 800x600 35.2 56.3 VESA 800x600 37.9 60.3 VESA...

Page 31 - Appendix; Features and Connection; AV Connection Port; Figure 27 Connection of AV box; For Video and Audio Input from VHS or V8; visit the Acer Peripherals, Inc. Web site for more information; AV Control Pad; Select the source

Appendix Guideline to Acer 7763PS AV box 1. Features and Connection AV Connection Port This box is compatible with RCA input, S-Video input, audio output . Figure 27 Connection of AV box Speaker RCA Jack For Video and Audio Input from VHS or V8 S Video Port For S-Video Input Phone Jack For Video inp...

Page 32 - Connecting the Box; Figure 28 Bottom View of AV box

Connecting the Box Please follow the instruction here to place the AV box: To attach the AV box to the unit ： Figure 28 Bottom View of AV box Figure 29 Side View of AV box 1. Precisely place the two chocks at the lower surface of the AV box into the lower slots in the correspondent position in the p...

Acer PalmPro 7763PS- User Manual

Table of Contents:

Summary

Other Acer Models