Acer M190HQDF- User Manual

English 6 Rear panel view 1 AC-in 2 Service port 3 HDMI 4 VGA-in + PC Audio-in 5 SPDIF out 6 AV in-S-video, CVBS, Audio L/R 7 AV in-COMPONENT + Audio L/R 8 SCART 9 Tuner* 4 3 2 1 8 7 6 5 9 * Tuner could support analog, digital and mixed signal.

English 7 General keys Remote control OK DISPLAY GUIDE WIDE SOURCE MENU MUTE TELETEXT INDEX SIZE HOLD REVEAL SUBTITLE BACK CANCEL FAV MPX 1 8 4 10 7 23 4 SOURCE (TV/Video/S-Video/Component/SCART/D-Sub/HDMI) Press to select correct input mode. 5 WIDE Press to toggle scaling mode between 4:3, 16:9, an...

English 8 OK DISPLAY GUIDE WIDE SOURCE MENU MUTE TELETEXT INDEX SIZE HOLD REVEAL SUBTITLE BACK CANCEL FAV MPX 1 Colour buttons (R/G/Y/B) Operates corresponding button on the teletext page. 2 INDEX Press to go to the index page. 3 SIZE Press once to zoom teletext page to 2X. Press again to resume. 4 ...

English 9 Connecting the power cord 1 Connect the AC cord into the AC input on the back of the set. 2 Connect the plug to the wall outlet as shown. Basic connections Enjoying analog and digital TV Connecting an antenna/cable Connect the antenna cable to the appropriate antenna terminal on the back o...

English 10 Setup may vary due to local broadcast differences. Getting started watching your TV You can also adjust these settings using the front control panel. Please see "Front panel view" on page 8 for details. 1 Power a. Turn on the power switch beneath the screen.b. Press the power butt...

English 11 3 Changing channels a. Press 0 - 9 on the remote control to select a channel. The channel changes after 2 seconds. Press OK to select the channel immediately. b. Pressing the channel ( CH ) up / down button on the remote control will also change the channel. 4 Adjusting the volume Adjust ...

English 12 Connecting external audio/video devices Connecting a DVD, VCR, STB or audio/video equipment Connect your DVD player, VCR or audio/video equipment using the SCART port located at the rear of your LCD TV as shown below. Source-in Y Yellow Red White Blue Green R W or DVD PC VCR STB or HDMI D...

English 13 TV-out AV Recorder SPDIF SCART * Analog TV signal output through SCART is only available when watching an analog TV channel. Connecting a camera, camcorder or game console Connect your camera or camcorder to the video/audio ports on the left of the TV set as shown below. HDMI R B G R B G ...

English 14 Connecting a PC or notebook computer To display PC output on your TV, connect your PC or notebook computer to the TV as shown below. For VGA connections, Acer recommends setting your PC’s external monitor resolution to 1360 x 768 pixels @ 60 Hz refresh rate. D-Sub D-Sub Selecting the inpu...

English 15 Channel controls To open the channel list feature: 1 OK Press the OK key on the remote control. This will bring up the channel list menu. 2 The current channel will be highlighted. 3 Use the directional keys to navigate the list and select the channel you wish to watch. Channel list Chann...

English 16 Storing favourite channels 1 OK Press the OK key on the remote control. This will bring up the channel list menu. 2 The current channel will be highlighted and press the FAV key to store it as favourite channel. 3 Back Press the BACK key on the remote control to exit. Viewing your favouri...

English 17 Electronic programme guide The electronic programme guide (EPG) is an onscreen service available on digital and cable TV that provides information about scheduled broadcast programmes on all digital channels by time, title and channel. Guide screen There are four main areas of the EPG scr...

English 19 OSD navigation Many of the advanced settings and adjustments are available through using the OSD (onscreen display) menus, as shown in the example screenshot below. Basic operations required to navigate these menus (Picture, Audio, Channel management, Settings and Advanced) are described ...

English 20 Adjusting the OSD settings The OSD can be used for adjusting the settings of your LCD TV. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, audio settings, channel settings and general settings. For advanced settings, please refer to following page: Ad...

English 21 The options available on the OSD may vary depending on the TV signal source and model. Some digital options may not be available with an analog signal and vice versa. Adjusting settings 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select Settings from the OSD. T...

English 22 OSD menus Picture settings Open the Picture menu as described in the OSD navigation section. This menu provides the following settings: Scenario mode Scenario mode provides preset viewing modes designed to give you the best picture quality when watching a particular kind of programme. The...

English 24 Audio settings Open the Audio menu as described in the OSD navigation section. This menu provides the following settings: Scenario mode Scenario mode provides preset audio modes designed to give you the best sound quality when listening to a particular kind of programme. These provide pre...

English 26 Channel management Open the Channel Management menu as described in the OSD navigation section. This menu provides the following settings: Auto scan Auto scan allows you to scan for new or deleted channels. If you completed the setup wizard the first time you turned on your TV, all availa...

English 27 MPX If you are viewing an analog channel that supports multiple sound signals (e.g. NICAM, Bilingual), you may set which signal is used. Preferred audio language If multiple audio streams are available, the TV will attempt to use the language set here. The current setting is displayed in ...

English 28 Settings Open the Settings menu as described in the OSD navigation section. This menu provides the following settings: Wide mode Press to toggle scaling mode between 4:3, 16:9 and different Letterbox modes (1, 2, 3). Wide Detect is also available when viewing digital TV, HDMI and SCART si...

English 29 Advanced Open the Advanced menu as described in the OSD navigation section. This menu provides the following settings: Parental control Parental control is a handy feature that can block chosen TV sources. Parental control allows you to enter a password and effectively stop anyone without...

English 31 Troubleshooting Before you call the Acer service center, please check the following items: Here is a list of possible situations that may arise during the use of your LCD TV. Easy answers and solutions are provided for each. There is no picture or sound. • Make sure the power cord is prop...

English 32 PC Input Signal Reference Chart Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Standard 1 640 x 480 31.5 60.0 VGA 2 640 x 480 37.9 72.8 VGA 3 640 x 480 37.5 75.0 VGA 4 640 x 480 35.0 66.7 MAC 5 720 x 400 31.5 70.1 VESA 6 800 x 600 35.2 56.3 SVGA 7 800 x 600 37.9 60.3 SVGA 8...

English 33 Product specifications Model M190HQD Panel spec Resolution (pixels) 1366 x 768 Brightness (typ.) 250 nit Contrast Ratio (typ.) 1000 : 1 Dynamic Contrast Ratio (max.) 1000000:1 Viewing angle (typ.) H: 80 o ; V:80 o Response (typ.) 5 ms (Gray to Gray) Power supply Input 100 to 240 V AC (50~...

English 35 Wall mount preparation / removing the base M190HQD 1) Remove the base. 2) Remove the screws from inside the stand. 3) Assemble the wall mount following the instructions included with the wall mount. Caution: Disassemble the base carefully otherwise the plastic parts and/or TV body may be ...