Acer DD550A- User Manual
Acer DD550A– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Safety precautions and maintenance; Important Safety Instructions
- Page 6 – Use
- Page 8 – Remote Controller Precautions:; Two sides brightness level only be controlled by front side OSD
- Page 9 – Installation Notes
- Page 11 – Unpacking
- Page 12 – Accessories; Dual Side Display x1
- Page 13 – Over View; Front View
- Page 15 – Step1 : Putting the dual side display upside
- Page 16 – Step2 : Remove the three I/O covers on the sides
- Page 17 – Step3 : Remove the downside cover
- Page 18 – Step4 : Connect Power Box to Dual Side Display; Power Box; Red line
- Page 19 – Yellow line
- Page 20 – Step5 : Connect by HDMI connector
- Page 21 – Reinstall the downside
- Page 22 – Step7 : Connect the power cord
- Page 23 – Step8: Using the Remote Control; Key; Into OSD module; Exit
- Page 24 – OSD Setting Menu; Luminance
- Page 25 – Color
- Page 27 – Setup
DD550
55” Dual Side
Display
User Manual
(English)
V1.
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Safety precautions and maintenance WARNING: Use of control, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Important Safety Instructions Important Safety Instructions Read and follow these inst...
Use • Don’t turn the ventilation hole of Power Box upside down. As shown in the picture below. The ventilation hole of power box 6 It is prohibited to place tilt The ventilation hole of power box It is prohibited to turn the ventilation hole of Power Box upside down.
Use Remote Controller Precautions: • This product requires remote switch (ON/OFF) from Front Side ; the Back Side only has OSD function operated by remote controller. • Two sides brightness level only be controlled by front side OSD simultaneously , won’t be separate to control the brightness level....
