Page 3 - Contents
Contents Important safety instructions...........................................................................................5 Taking care of your remote control ......................................................................... 6 Cleaning and servicing ......................................
Page 5 - Important safety instructions
5 Important safety instructions Read these instructions carefully. Save them for future reference. 1 Follow all warnings and instructions marked on the product. 2 Unplug this product from the power outlet before cleaning. Use a soft, moist cloth for cleaning. Do not use liquid or aerosol cleaners. 3...
Page 6 - Taking care of your remote control; Cleaning and servicing
6 Englis h Taking care of your remote control Follow these steps to ensure proper care of your remote control: • Handle the remote control with care. Dropping it, placing it in direct sunlight, or allowing it to get wet may cause damage. • Do not tamper with the batteries, and keep them away from ch...
Page 7 - BEFORE YOU START; -1 What’s in the Box
7 1 BEFORE YOU START 1-1 What’s in the Box When you receive your LCD TV, unpack it carefully, and check to make sure you have all the items below. REMOTE CONTROL and ONE L3120 BATTERY POWER CORD USER’S MANUAL WARRANTY TV CABLE COMPONENT CABLE COMPOSITE CABLE S-VIDEO CABLE
Page 8 - YOUR LCD TV AT A GLANCE
8 Englis h 2 YOUR LCD TV AT A GLANCE 2-1 Control Panel BUTTON VIEWING FUNCTION (OSD OFF) MENU FUNCTION (OSD ON) Lowers the sound level. Reduces a menu option value. Increases the sound level. Displays a submenu with selections for the current menu option. Increases a menu option value. Selects the i...
Page 11 - YOUR REMOTE CONTROL AT A GLANCE
Page 13 - BASIC LCD TV SETUP; -1 Connecting to the Aerial
13 4 BASIC LCD TV SETUP 4-1 Connecting to the Aerial Connect the outdoor aerial (antenna) cable lead or your cable TV box to the TUNER (UHF/VHF-CATV) jack on the back of your LCD TV using an RF (coaxial) lead. See 2-2 Left-side Connectors for location. 4-2 Using the Remote Control (Basic Operation) ...
Page 14 - -3 Plugging In Your LCD TV
14 Englis h 4-3 Plugging In Your LCD TV 1. Connect the power cord to the power cord connector on the back of your LCD TV. 2. Plug the other end of the power cord into a properly grounded electrical outlet or surge protector.
Page 15 - -4 Turning ON the Power
15 4-4 Turning ON the Power Press the Power button on the top of the LCD TV (see 2-1 Control Panel for location). The Status LED on the front turns green and your LCD TV turns on. -OR- Press the POWER button on your remote control. The Status LED on the front turns green, and the unit turns on. WARN...
Page 18 - CONNECTING EXTERNAL DEVICES; -1 Connecting a YPbPr Device; -4 Turning ON the Power
18 Englis h 5 CONNECTING EXTERNAL DEVICES Read this section to learn how to connect the following devices: DVD players HDTV decoder set-top boxes VCRs Computers WARNING! Before connecting any external components, make sure to unplug your LCD TV and any connecting devices to prevent damage. 5-1 Conne...
Page 19 - -2 Connecting a Composite Device
19 5-2 Connecting a Composite Device 1. Connect the yellow video jack from your composite device to the yellow AV jack on the side of your LCD TV with an RCA cable (not supplied). 2. Connect the red (R) and white (L) audio jacks from your composite device to the AV R and L audio-in jacks on the side...
Page 22 - -5 Connecting Speakers; -3 Back Connectors Connectors
22 Englis h 5-5 Connecting Speakers Connect a headphone or speakers to the Audio-out jack on the back of your LCD TV. See 2-3 Back Connectors Connectors for the location of the Audio-out jack.
Page 23 - ADJUSTING SETTINGS; -1 Basic Operations; To adjust volume from the front panel:
23 6 ADJUSTING SETTINGS 6-1 Basic Operations 6-1-1 ADJUSTING THE VOLUME You can adjust the volume in two ways - from your LCD TV’s front panel or by using the remote control. To adjust volume from the front panel: Press to increase/decrease the sound level. INPUT
Page 24 - TO ADJUST VOLUME FROM THE REMOTE; TO TURN VOLUME BACK ON
24 Englis h TO ADJUST VOLUME FROM THE REMOTE Press VOL (see illustration for location) to turn the volume up or down. TO TEMPORARILY TURN OFF VOLUME (MUTE) Press the MUTE button on the remote control. TO TURN VOLUME BACK ON Press the MUTE button again or press VOL .
Page 25 - TO SELECT PROGRAMS FROM THE LCD TV; TO SELECT PROGRAMS FROM THE REMOTE; Your
25 6-1-2 SELECTING PROGRAMS TO SELECT PROGRAMS FROM THE LCD TV Press to select programs (see 6-1-1 Adjusting the Volume for location). TO SELECT PROGRAMS FROM THE REMOTE Press CH (see illustration for location). ， OR Press the number buttons on the number pad (see 3 Your Remote Control At a Glance f...
Page 27 - -3 OSD Menus and Options; Main Menu
27 6-3 OSD Menus and Options You can use these OSD menus and options to adjust various settings for your LCD TV. 6-3-1 With Source Input Set to TV Main Menu Input Select Menu Use this menu to switch between available signal input sources. NOTE: AV shares the either S-video or CVBS (RCA phono). 圖片有錯 ...
Page 28 - Picture Menu
28 Englis h Picture Menu Brightness - Adjusts the luminance of the image. Contrast - Adjusts the contrast ratio. Color - Adjusts the color saturation, making colors more or less intense. Sharpness - Adjusts the sharpness of the image. Restore - Select ON to use factory default image settings. Color ...
Page 30 - Setup Menu
30 Englis h Setup Menu Country - Select the appropriate country signal. If your country is not listed, choose one that uses the same TV system. Color System - Select a color system. Choices are Auto, PAL, and SECAM. Sound System - Select from BG, DK, I, and L. Auto Setup - Select this option to add ...
Page 31 - ADVANCED SETTINGS; -1 Setting the Sleep Timer
31 7 ADVANCED SETTINGS 7-1 Setting the Sleep Timer The sleep timer allows your LCD TV to automatically turn OFF after a given amount of time. TO SET THE SLEEP TIMER USING THE REMOTE CONTROL 1. Press the TV button. 2. Press the SLEEP button on the remote control. The sleep timer appears at the bottom...
Page 32 - TROUBLESHOOTING AND SUPPORT; No Picture; No Sound; Distorted Picture or Unusual Sounds
32 Englis h TROUBLESHOOTING AND SUPPORT Before contacting customer service, use the following information to solve common problems. No Picture Make sure that the power cord is properly plugged into a grounded electrical outlet. Make sure that the main power switch and power button are turned ON. Mak...
Page 34 - PRODUCT SPECIFICATIONS
34 Englis h PRODUCT SPECIFICATIONS Model Name AT2001 Panel spec Resolution 800*600 Brightness (typ.) 450 nits Contrast Ratio (typ.) 500:1 Display color 16.7 M Viewing Angle (typ.) H:160 ; V:120 Response Time (typ.) 16 ms (gray to gray) Power Supply Input 100V~240V-AC Max. Power 63W Power Saving 5W M...
