Acer Aspire R3600- User Manual

Information for your safety and comfortiii Safety instructions iii Disposal instructions vi Mercury advisory vi ENERGY STAR vi Tips and information for comfortable use vii Product Registration 1 How to Register 1 Another Option 1 System tour 2 Setting up your computer 2 Necessary to know before setu...

To clean your monitor 21 When to contact a service technician 21 Asking for technical assistance 22 Regulations and safety notices 23 FCC notice 23 Federal Communications ComissionDeclaration of Conformity 25 Remark: All images are for reference purposes only.Actual configuration may vary.

1 Englis h Product Registration When using your computer for the first time, it is recommended that you immediately register it. This will give you access to some useful benefits, such as:• Faster service from our trained representatives • Membership in the Acer community: receive promotions and par...

2 Englis h System tour Your computer has the following features: Note: The specifications listed above are for reference only. The exact configuration of your PC depends on the model purchased. Setting up your computer The AcerSystem is a versatile and powerful system, supporting a mainstream perfor...

3 Englis h Necessary to know before setup Selecting a location Selecting the optimum location for your computer:• Do not place the system too close to other electrical equipment. • Do not place the system in high-traffic areas or where the power cord or other cords may be stepped on. • Avoid placing...

4 Englis h 1 Turn on all peripheral equipment, such as the monitor, printer, fax, speakers, etc. 2 Turn on the system. Once the start up process is complete, you can begin to use your computer. Shutting down your computer From the "Start" menu, select "Shut Down" and click OK. In the...

5 Englis h Set up Aspire RevoBoot The first time you use Aspire RevoBoot by clicking on any of the applications available in the boot-up screen, a wizard will guide you through the basic configuration steps. If you click Close, Vista will automatically boot up.

6 Englis h Each time you switch on your computer, you will see this screen. If you do not move the mouse within 10 seconds, your computer will continue to start up the operating system. Use Aspire RevoBoot Click on any of the icons on the screen or the launch bar, located at the bottom of the screen...

8 Englis h The Configuration Panel The Configuration Panel allows you to set: Configure RevoBoot in Windows Vista You can adjust some of the RevoBoot settings under Windows Vista; to do this click Start > All Programs > RevoBoot > RevoBoot Installer and then: BookmarkSync Configure: Export ...

10 Englis h Using the controller and games Please take note of the following to enjoy gaming with your controller: • Check that the controller is switched on and connected with the receiver. • Use the Z controller games icon to play games with the controller. Insert the battery Remove the battery co...

12 Englis h Connect the controller and receiver • Make sure the computer power is on and press the power button on the controller. Player LEDs 1 to 4 will each flash once, in order, before the power LED turns blue indicating that the power is on. • Insert the receiver into a USB port and press the S...

14 Englis h Gun mode Twist the controller into the gun mode and hold it using one hand. For details, refer to your game's documentation. Sport mode Front swing Back swing Serve

15 Englis h Aviation mode Hold the controller, in gun mode, with the hinge facing forward. Move the hinge of the controller up to increase altitude. Move the hinge of the controller down to decrease altitude. Tilt the controller to the left to bank left. Tilt the controller to the right to bank righ...

16 Englis h Racing mode Hold the controller, in gun mode, with the hinge facing up. Turn left Turn right The controller can also be used as a mouse to control your computer. 3D Mouse mode This mode can be used in both straight and gun mode. The 3D mouse mode can be enabled and disabled by pressing H...

17 Englis h Note: The default mode of the controller is the browsing mode. If the cursor goes beyond the borders of the screen, use Button A to move the cursor to the edge of the screen for re-centering. Play games Click the Game icon to view the available games. Make sure the controller is on and c...

English 19 Frequently asked questions The following questions are possible situations that may arise during the use of your computer and each is followed by easy answers and solutions to the situation. Q: I pressed the power switch but the system did not boot up.A: Check the LED located above the po...

E ng li sh E n g lis h E ng li sh E ng li sh E ng li sh E ng li sh En gli sh 20 A: Do the following:• Make sure that the printer is connected to a power outlet and that it is turned on. • Make sure that the printer cable is connected securely to the system's USB port and the corresponding port on th...

E ng li sh E n g lis h E ng li sh E ng li sh E ng li sh E ng li sh En gli sh 22 • If you want to replace or upgrade any of your computer's internal components Asking for technical assistance For technical assistance, contact your local dealer or distributor. You may also access the Web site (http://...

23 Eng lish Eng lis h Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential ...

24 English Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired ope...

25 Eng lish Eng lis h Federal Communications ComissionDeclaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, inc...