Acer AC701 - Manual - manualsarea.com

Page 2 - Table of Contents

2 Table of Contents Important Safety Instructions ....................................................... 3 Federal Communications Commission.......................................... 5 Connecting the Monitor and Swivel Base.................................... 6 Removing the Monitor and Swivel Base ...

Page 3 - Important Safety Instructions

3 Important Safety Instructions 1. Please read these instructions thoroughly. 2. Please keep this guide for future use. 3. Please disconnect the device from the main power supply before cleaning. Do not use any liquids or aerosol sprays to clean this device. Use a clean dampened cloth in stead. 4. T...

Page 5 - Federal Communications Commission; Canadian DOC Notice

5 Federal Communications Commission ( FCC Statement ) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal...

Page 6 - Connecting the Monitor and Swivel Base; Removing the Monitor and Swivel Base

6 Connecting the Monitor and Swivel Base 1. Place the monitor with its tube down on a stable surface. 2. Align the four tabs of the swivel base with the slots in the bottom of the monitor. 3. Insert the tabs into the slots of the monitor 4. Now slowly slide the swivel base toward the front of the mo...

Page 7 - Introduction; Features

7 Introduction Congratulations on your purchase of this new high performance 17” Monitor. Using state-of-the-art electronics, this monitor supports a 1280 x 1024 resolution. The on-screen display allows you to customize the display settings to suit your individual taste. Features 17-inch monitor wit...

Page 8 - Installation; The installation of your monitor is now complete.

8 Installation 1. Connect the monitor signal cable 1 to the 15-pin mini D-sub (VGA) on the back of the computer. 2. Connect the power cord to the power connector on the back panel of the monitor, then plug the other end into an electrical outlet that is easily accessible, and close to the monitor. 3...

Page 9 - User Controls

9 User Controls 1. Power Switch 2. Power LED Indicator LED color Status Green On Turns the monitor on Amber Sleep 3. Select Button 4. Backward and Forward Buttons • Launches On -Screen Display • Make sure the select functions or adjustments • Exit menus and On-Screen Display • Backward button (left ...

Page 10 - OSD Function Description

10 OSD Function Description 1. Press the key to display the OSD menu. 2. To select a function, press the and keys until the desired function is highlighted. 3. Press the key to choose the function. 4. Use the and keys to increase or decrease the parameter level of the setting. 5. Press the key to sa...

Page 11 - OSD Icon Summary

11 OSD Icon Summary Icon Function Function Description Brightness Adjusts display brightness Contrast Adjusts display contrast H. Size Increases and decreases screen width H. Position Shifts display image right or left V. Size Increase and decrease screen height V. Position Shifts display image up o...

Page 12 - Specification

12 Specification Screen Size 17” CRT Dot Pitch (mm) 0.28 Surface Non –glare Viewable Image Area 16.14” (41.0 cm) Input Signal Video Sync. RGB Analog 0.7Vp-p/75 Ohm a. Separate H/V,TTL(+/-) b. Composite H+V,TTL(+/-) Scanning Frequency Horizontal (KHz) 30-70 Vertical (Hz) 50-160 Max. Resolution 1280 x...

Page 13 - Troubleshooting; Problem: Power LED is not lit when monitor is powered on.; Problem: Display image is either flickering or unstable.; Note

13 Troubleshooting Please refer to the following solutions for the failure symptoms that occur the most frequent. If the symptom remains after trying these suggested solutions, please contact your local authorized service center. Problem: Power LED is not lit when monitor is powered on. Check to mak...

Acer AC701 - Manual

Table of Contents:

Other Manuals for Acer AC701

Summary

Other Acer Models