Accusplit AX602M500DEC - Manual
Accusplit AX602M500DEC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – General Features; Press MODE to cycle through:
- Page 3 – Time of Day Mode; The display format is as below :; Normal Time Setting
- Page 4 – Alarm Time Mode; Alarm Time; Setting Alarm Time; Alarm
- Page 5 – Chronograph and Recall Mode; Split time
- Page 6 – Whenever the storage is full, extra; Any fastest and; Decimal Timing; Time base indicator
- Page 7 – Segmented run memory for lap/split time storage.; Chronograph Data Recall Mode
- Page 8 – watch is; DATA Mode; FREE
- Page 9 – How to delete individual memory segments:; Number of laps in; How to delete all memory segments:; dELETE
- Page 10 – Timer Mode; Under CR operating mode,; the timer value will; Under CS operating mode,
- Page 11 – How to set the timer; Pacer Mode; beats per minute
- Page 12 – Stroke/Stride Measurement; STROkE; Speed Mode; Distance; Distance Setting; Distance units
- Page 13 – Speed Mode Running
- Page 14 – both the speed and elapsed time can be retrieved.; Lap Time & Speed Recall
b-1
ACCUSPLIT, Inc.
6120 Stoneridge Mall Rd., Suite 210
Pleasanton, CA 94588 USA
800-965-2008 • 925-226-0888 • FAX 925-463-0147
www.ACCUSPLIT.com • [email protected]
980-314
ACCUSPLIT®
E
X
C L U S I V E
AX602M500
AX602M500DEC
DIGITAL QUARTZ
STOPWATCHES
OPERATING
INSTRUCTIONS
2-3
2
3
IMPORTANT NOTE
This stopwatch can store up to 500 split/lap times.
However please note when there are 5 free mem-
ories left, the icon “FULL” will blink to remind you
of the nearly full situation. Whenever the storage
is full, extra split/lap times will NOT be stored into
memory even though you reset your stopwatch
and start a new event. Extra split/lap times will
only be shown on the display but not recorded.
In order for the stopwatch to record the lap/split
times again, you must delete the data in the DATA
memory. Please refer to the “Data Mode” section
in the instruction manual for how to delete the
memory.
INSTRUCTIONS
Introduction
You are about to enjoy an advanced Cumula-
tive and Lap memory professional digital quartz
stopwatch with advanced timing features. Models
AX602M500 & AX602M500DEC Stopwatches
include Time of day, Daily Alarm, Chronograph
stopwatch, 500 memory, Data register, Count-
down timer, Stroke Measurement timer, and Pacer
(from 5 to 240 beats per minute).
Model AX602M500DEC Decimal Stopwatch
includes Decimal timing (1/100 of a sec,
1/1000 of a minute, 1/100,000 of an hour).
Model AX602M500 Speed Stopwatch includes
Speed Measurement.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4-5 4 5 General Features • ACCUSPLIT X case with ergonomic design and no-fail buttons • 4 button operation • Large LCD display with contrast adjustment • 12/24 hour display • Time of day and chime • Daily alarm • Full 1/100 second chronograph with working range from 0 to 19 hr. 59 min. 59.99 seconds...
8-9 8 9 This is only a brief description of these buttons. Detailed uses of the buttons are different in particular functions and will be described later in the instructions. Pressing [MODE] button will toggle among the modes above. Note that there is no auto-return function in the stopwatch. Whenev...
12-13 12 13 date-month (d-m), Sound ON or OFF, Contrast (darkness of the digits - default is 9), then back to Second, and recycles again. Note: when the second is to be set, press [START • SPLIT] to reset the second digits to zero. At the end of setting, press [RECALL] (S4) or [MODE] to exit from th...
