Abocom M73-APO08-420 - Manual

Page 3 - INTRODUCTIONS; Specifications; Network standard

INTRODUCTIONS The USB 10/100M Fast Ethernet Adapter provides outside-the-box plug-and-play local area network connections for USB-enabled PCs, notebooks and laptops. This adapter uses a B type USB port to connect with the USB host, and an RJ-45 port to connect with a 10/100 Fast Ethernet LAN link. I...

Page 4 - Parts Names and Functions; USB Connection Cable:; connects the USB; USB Fast Ethernet Adapter; LED indicator: blinks green when the; Link; LED indicator: glows green when; Network Port; : connects the Fast Ethernet

Parts Names and Functions USB Connection Cable: connects the USB host port to the USB 10/100M Fast Ethernet Adapter. c o n n e c ts to t he US B ho st p o r t 1 3 2 4 6 5 USB-B Port : USB device port. USB Fast Ethernet Adapter Rx/Tx LED indicator: blinks green when the Fast Ethernet Adapter is trans...

Page 5 - HARDWARE INSTALLATION; Precaution; My Computer Control; Getting Hooked Up; Locate the USB host port of your system.

HARDWARE INSTALLATION Precaution Before the installation, make sure the USB port exists in your computer and is enabled. To check this, go to My Computer Control Panel System . Open the Device Manager tab. If the Universal Serial Bus controller device is found, it means your USB port is installed an...

Page 6 - USB B; 0/100M Fast Ethernet Adapter until it clicks.

2. Connect another end of the USB connection cable to the device port ( USB B ) of your USB 10/100M Fast Ethernet Adapter until it clicks. 3. Connect the UTP cable to the Fast Ethernet Adapter. 4. Connect the other end to a Hub. - 4 -

Page 7 - SOFTWARE INSTALLATION; Installation for Windows 98; Insert the device driver disk into your; Next

SOFTWARE INSTALLATION Installation for Windows 98 1. Once the device is properly connected to your computer, Windows 98 will automatically detect the new hardware device. Perform the following procedures for installing the device driver. 2. Insert the device driver disk into your floppy drive. When ...

Page 9 - Setup Diagnostics

5. Go to Start Settings Control Panel . Double-click Network . 6. When the Network dialog box appears, select USB 10/100M Fast Ethernet and click Add . Set the appropriate protocols and client for you needs. When completed, click OK . 7. Remember to restart your computer to activate the new device S...

Page 10 - Adapter; is found, it means that your device is; Installation for Windows 2000; Once the device is well connected to your; to

Adapter is found, it means that your device is properly installed and enabled. Installation for Windows 2000 1. Once the device is well connected to your computer, Windows 2000 will automatically detect the new device. Click Next to proceed. - 8 -

Page 13 - Installation for Windows ME

9. Remember to restart your computer to activate the new device. Setup Diagnostics To verify if the device exists in your computer and is enabled, go to Start Settings Control Panel System Hardware. Click the Device Manager tab. If the USB 10/100 Network Adapter is found, it means that your device i...

Page 14 - . Windows will copy all the

3. Click Next to continue. 4. Click Next . Windows will copy all the necessary files to your system. - 12 -

Page 16 - Installation for Windows XP

click Add . Set the appropriate protocols and client for you needs. When completed, click OK . 9. Remember to restart your computer to activate the new device. Setup Diagnostics To verify if the device exists in your computer and is enabled, go to Start Settings Control Panel System. Click the Devic...

Page 17 - Insert the device; Driver Disk; into the

2. Insert the device Driver Disk into the floppy disk drive of your system. Select Search removable media (floppy, CD-ROM…) and click Next. 3. Click Next to continue. - 15 -

Page 18 - Continue Anyway; The software installation for

4. Windows will start searching for the appropriate driver for the installation. When the screen appears as below, click Continue Anyway to proceed. 5. Wait for seconds while Windows copies the appropriate driver to your system. 6. Click Finish. The software installation for this network device is n...

Page 19 - Start; When the Network dialog box appears,

7. Go to Start Settings Control Panel Network and Dial-up Connections . Double-click Local Area Connections . 8. When the Network dialog box appears, select USB 10/100 Network Adapter and - 17 -

Page 20 - click; Install; . Set the appropriate protocols

click Install . Set the appropriate protocols and client for you needs. When completed, click OK. 9. Remember to restart your computer to activate the new device. Setup Diagnostics To verify if the device exists in your computer and is enabled, go to Start Control Panel System . Click the Device Man...

Abocom M73-APO08-420 - Manual

Table of Contents:

Summary

Other Abocom Models