Abey N200UW - User Manual
Abey N200UW Sink – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
NOTE: paper and cardboard templates where
supplied are only to be used as a guide.
Using the actual sink ensures a more
accurate cutout.
Clean the bottom of the countertop and the
top flange (or lip) of the sink with methylated
spirits. Then apply a bead of silicone to the
top edge of the bowl. Position sink in place
then screw the bridge plate to the timber
border using the thumb screws to secure
the sink in correct position.
Attach a timber border evenly around the
perimeter of the countertop cutout to
accommodate the size of the sink.
This should be epoxied/adhered to the
underside of the countertop.
Templates are supplied only as a guide. The physical use of the sink will ensure a more accurate cutout. Abey recommends that undermount sinks and routering of your solid
surface material should be installed by a professional installer for best results. Warranty is voided if epoxy or adhesive is used to secure the sink to the bench.
SCHOCK UNDERMOUNT SINK
INSTALLATION INSTRUCTIONS
1
SILICONE
SEALANT
3
TIMBER
BORDER
(MIN 25mm
THICK)
2
Flange
(or lip)
Timber
Border
Epoxy/
Adhesive
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
