3M CSFM1254 - Manual
3M CSFM1254 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY INFORMATION; EXPLANATION OF SIGNAL WORD CONSEQUENCES; WARNING
- Page 3 – IMPORTANT NOTES; TABLE OF CONTENTS; SECTION DESCRIPTION; Failure to follow instructions will void warranty.; Inspecting And Handling Your Softener:
- Page 4 – Check Your Pumping Rate and Water Pressure:; CAUTION; Locate Water Conditioning Equipment Correctly:
- Page 5 – Facts to Remember While Planning Your Installation:; To reduce the risk associated with a hazardous voltage:; IMPORTANT NOTE
- Page 6 – Read and follow; MUST; STANDARD WELL INSTALLATION; Figure 1. Typical Installation
- Page 7 – Use PTFE thread tape only,; after water is shut off.; DO NOT; • On plastic fi ttings, never use pipe sealant or pipe dope.; Use PTFE thread tape only,; pipe dope properties may deteriorate plastic; SOFTENER AND BRINE TANK ASSEMBLY, TOP VIEW
- Page 8 – Figure 4. BYPASS VALVE; Clamp Assembly
- Page 9 – SECTION 3: CONTROL VALVE PROGRAMMING AND REGENERATION; Installer Display Settings; Press NEXT and simultaneously for 3 seconds.; Power Lost; Grains Capacity/lb NaCl
- Page 10 – Diagnostics; Press the NEXT button. Press REGEN to exit Diagnostics.; ing the button to show the gallons for days 3, 4, 5 and 6. The
- Page 11 – Valve History; ton to go to the next step or press REGEN to exit Valve History.
- Page 12 – User Display Settings; General Operation; When the system is operating, one of two displays will be; Manual Regeneration; toggles after 12. Press NEXT to go to Step 3.; Regeneration Mode
- Page 13 – SECTION 4: MAINTENANCE; Replenishment of Salt Supply:
- Page 14 – SECTION 5: CONTROL VALVE TROUBLESHOOTING GUIDE; Problem
- Page 15 – SECTION 5: CONTROL VALVE SERVICE INSTRUCTIONS; Drive Cap Assembly, Main Piston and Regenerant Piston:
- Page 16 – Figure 7
- Page 18 – SECTION 5: SYSTEM TROUBLESHOOTING GUIDE
- Page 19 – SECTION 6: SPECIFICATIONS AND OPERATING DATA; ITEM
- Page 20 – COMPONENT PARTS LIST; REF
- Page 21 – Description
- Page 30 – LIMITED WARRANTY
INSTALLATION AND OPERATING
INSTRUCTIONS
CFSM1254 WATER SOFTENER
Installer: Please leave this manual with owner/operator.
Owner/Operator: Please retain for operation and future
maintenance instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SAFETY INFORMATION Read, understand, and follow all safety information contained in these instructions prior to installation and use of the CFSM1254 Water Softener. Retain these instructions for future reference. Failure to follow installation, operation and maintenance instructions may result in pr...
IMPORTANT NOTES • The system should be installed on cold water lines only. • Failure to follow instructions will void warranty. TABLE OF CONTENTS SECTION DESCRIPTION 1 BEFORE INSTALLATION 2 INSTALLATION 3 CONTROL VALVE PROGRAMMING AND REGENERATION 4 MAINTENANCE 5 TROUBLESHOOTING AND SERVICE INSTRUCT...
Check Your Pumping Rate and Water Pressure: Two water system conditions must be checked carefully to avoid unsatisfactory operation or equipment damage: 1) MINIMUM water pressure required at the water softener inlet is 20 psi (1.4 bar). IF WATER PRESSURE IS OVER 80 psi (552 kPa), A PRESSURE REDUC- I...
