3M 8700 - Manual
3M 8700 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warranty Information; Warranty and; merchantability; Warranted Durability; minimum; Putting Toners in Printers
- Page 3 – Toners
- Page 4 – Toner Bottles; Rinse thoroughly with 3M; Cleaning Bottles; M Related Literature; Warranties; Bulletin Change Summary
Product & Instruction Bulletin 8700/8800
Release D, Effective December 2009
(Replaces C, Jan 2000)
See Bulletin Change Summary at end of Bulletin
Now Includes Contents of Instruction Bulletin 4.12
Scotchprint
)
Exterior Four Color Toner Series 8700/8800
For Electrostatic Printing Only
Description
Four Color
Electrostatic Printing
This is the reproduction of a full color original subject as a halftone. Black plus the three basic
halftone colors (yellow, cyan and magenta) are printed sequentially in close registration to
form the image.
The images are reproduced on 3M™ Trident Transfer Media, which is transferred with heat
and pressure to 3M brand graphic films designated for electrostatic printing. The printed
images must have an approved overlaminate. See the base film's Product Bulletin for details.
Recommended Types of
Graphics and End Uses
Refer to the base film or flexible substrate's Product Bulletin for details on specific
constructions and any warranty that may apply when using this product.
Limitations of End Uses
3M specifically does not recommend or warrant the following uses, but please contact us to
discuss your needs or recommend other products. The base film Product Bulletin may have
additional limitations.
•
Printing characteristics of toners more than 36 months after date of manufacture.
•
Use in printers other than those recommended by 3M.
•
Printing on non‐3M medias.
Compatible Products
•
3M™ Trident Transfer Media
•
3M brand graphic films designated for electrostatic printing
•
3M™ Cleaner 8790; Use for flushing and cleaning printers
•
3M™ Toner Module Thinner 8791; Use with the 3M
t
High Capacity Toner Station 9531
or 9533
•
3M™ Toner Module Cleaner 8792; Use for flushing and cleaning the toner station
Product Line
Toners are specially formulated the Scotchprint
®
Printer 2000, with or without a toner
station, and are available as concentrates and premixes (part A & B).
Color
For Printer
For Toner Station
Size (Premix or
Concentrate)
Type
No.
Type
No.
Yellow
Premix
8730N
Concentrate
8835
1.2 gal
Magenta
Premix
8731N
Concentrate
8836N
1.2 gal
Cyan
Premix
8732
Concentrate
8837E
1.2 gal
Black
Premix
8733
Concentrate
8838E
1.2 gal
3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Product & Instruction Bulletin 8700/8800 - 2 Warranty Information Warranty and Limited Remedy The following is made in lieu of all other express or implied warranties, including any impliedwarranty of merchantability or fitness for a particular purpose or implied warranty arising out of a course...
Product & Instruction Bulletin 8700/8800 - 3 On a weekly basis, remove the premixed toners from the printer and the concentrates fromthe toner station, replace the cap, and shake well, to maintain good dispersion and optimalprinting characteristics. Two-Part Pre-Mix Instructions Read these instr...
Product & Instruction Bulletin 8700/8800 - 4 Unlike most printing processes, there is more than just residual toner left in the containerwhen it is time for disposal. Approximately 4 to 10 quarts (4 to 10 liters) of electrostatic tonerwaste is generated each time the toners are changed, dependin...
