3M 702 - Manual
3M 702 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Table of Contents
- Page 5 – Safety Information; Intended Use; It has not been evaluated for other uses.; Explanation of Signal Word Consequences; Attention: Read accompanying documentation
- Page 6 – Safety messages; WARNING; To reduce the risk associated with fire and explosion:; Do not allow battery pack to come in contact with water; CAUTION
- Page 7 – Important Notes
- Page 8 – Safety label locations
- Page 10 – Getting Started; The Model 702 can only be used with systems that use; Specifications; Typical ambient temperature range: 50°F to 104°F (10°C to 40°C); card
- Page 11 – Handheld components; Be careful not to damage the handheld.; DO NOT drop the Handheld.
- Page 12 – Controls and indicators; menu buttons; Figure 2: The handheld includes a menu-driven display screen.
- Page 13 – Using the Handheld Device for the first time; Step 1 – Use your system software to export
- Page 14 – Inserting the memory card; - Install a pull tab on the; No Database; or; Invalid Database; on; Figure 4: Insert the memory card as shown.
- Page 15 – Removing the memory card; Always return to the Home screen before removing the memory card.; Procedure; Home; to return to the Home
- Page 16 – Resetting the handheld; Symptoms may include:; reset button; If pressing the reset button; fully charged
- Page 17 – Formatting a memory card; Using Windows to format the memory card
- Page 18 – Adjusting the antenna; If the antenna is too loose; Cleaning the handheld; Storing the handheld for less than a week
- Page 19 – Battery Management; Battery charging guidelines; Battery use; Typical charge life; Sleep Mode; To conserve battery charge, the handheld will enter; “sleep; During sleep mode, the screen will go blank.; To bring the handheld out of sleep mode,; The display will revert to the last function that was used.
- Page 20 – Charging the battery; To charge a battery; Battery Charger Status Light
- Page 21 – Replacing the battery; Battery replacement
- Page 22 – Requesting service; M Service phone numbers; For software support; Ordering replacement parts
- Page 23 – Stock Number; To order parts; In the United States
Handheld RFID Reader
Model 702 and Model 802
Owners Manual
3M Security Systems Division
3M Center, Building 225-4N-14
St. Paul, Minnesota 55144-1000
Copyright © 2003-2004 3M IPC. All rights reserved.
78-8123-9267-4 Rev B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Copyright 2003-2004, 3M IPC. All rights reserved. Table of Contents Safety Information .......................................................................... 1 Intended Use.............................................................................................................................
1 Safety Information Read, understand, and follow all safety information contained in these instructions prior to installation of the 3M™ Handheld RFID Reader Model 702 and Model 802. Retain these instructions for future reference. Intended Use The 3M Handheld RFID Reader Model 702 and Model 802 are...
2 Safety messages WARNING To reduce the risk associated with fire and explosion: Do not attempt to use a damaged battery pack, charger, or power supply; Do not allow battery pack to come in contact with water; Do not disassemble, crush, or incinerate the battery pack — at the end of service life, di...
