3Com Z340PL - Manual
3Com Z340PL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PhaserLinkTM Upgrade for the Phaser 340 — Upgrade Kit Z340PL; Important! About the printer’s IP address; Menu; Help; arrow; Configuration pag; Print; Static electricity precautions
- Page 3 – Upgrading the printer; Removing the main board; Caution; Do not tilt the printer.
- Page 4 – Replacing the PostScript code ROM SIMM; Insert the new PostScript code ROM SIMM in connector P71 (
- Page 5 – Replacing the print engine ROM; Locate the print engine ROM on the main board.; GENTLY; Note
- Page 6 – Network Card Upgrade.; If necessary, install a network card upgrade kit; Setting the printer’s IP address; Write the printer ’s serial number on the shipping return label.
Copyright
©
1996
by Tektronix, Inc. All rights reserved.
063-2320-AA
Instruction Sheet
PhaserLink™ Upgrade for the Phaser 340 —
Upgrade Kit Z340PL
This kit provides the components to give your printer PhaserLink™ capabilities. With PhaserLink
firmware installed in your printer you can monitor and administer your printer using a World Wide Web
browser. Printer ’s serial-numbered BCxxxxx and above already have PhaserLink software installed.
Network card firmware version.
Your printer must have PhaserShare™ Version 2.0 (or higher) firmware
installed on its Ethernet or TokenRing network card to run PhaserLink software. The printer ’s
configuration page indicates the PhaserShare firmware level (see the next page to print out the
configuration page). If your printer does not have Version 2.0 PhaserShare software, you can upgrade
your printer ’s network card with either the 4676UP1 Upgrade kit (for the Ethernet network card) or the
4676UP4 Upgrade Kit (for the TokenRing network card).
Install the Z340PL Upgrade Kit first.
The PostScript Code ROM SIMM replaced by this upgrade kit must be returned to Tektronix; otherwise,
you will be invoiced for the unreturned ROM SIMM. Instructions for returning the ROM SIMM are
provided at the end of this instruction sheet.
Contents
■
Print engine ROM, Opt. 1: p.n. 163-0646-00 (Plus), OR
Print engine ROM, Opt. 2: p.n. 671-3913-00 (Std.)
■
PostScript ROM SIMM: p.n. 671-3809-00, OR
PostScript ROM SIMM, KANJI: p.n. 671-3811-00
■
Return shipping packaging and label (for the ROMs)
■
Anti-static wrist strap
■
ROM puller tool
■
Printer user manual, driver manual, disks and CD-ROM (Z340PL
upgrade kit only)
On-site installation
Professional, on-site installation is just a phone call away. Productivity is
important to your business success – so when you need it done right – the first
time – call Tektronix. Tektronix’ on-site installation delivers what you’ve been
looking for: expert service technicians who provide quality, on-site product
installation. To schedule installation, in the United States and Canada, call
1-800-835-6100. Elsewhere, contact your local Tektronix dealer.
Don’t install this upgrade, if you are not comfortable modifying electronic
equipment.
Phaser
®
340
Phaser
®
340 Plus
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Important! About the printer’s IP address Upgrading the printer will erase the printer ’s IP address from the printer ’s non-volatile memory. Therefore you should print the printer ’s configuration page, which lists the printer ’s IP addr...
3 PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Upgrading the printer Removing the main board Caution Do not tilt the printer. If you must move the printer to access the rear of the printer to install the upgrade, be careful not to tip or tilt the printer. Hot, liquid ink in the printe...
4 PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Replacing the PostScript code ROM SIMM 3. Remove the currently installed PostScript code ROM SIMM in connector P71 by spreading apart the hook-like metal pawls securing each end of the SIMM in its connector. Remove the SIMM. To protect th...
