3Com PRV-LX1 - Manual
3Com PRV-LX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – A Input; RCA; Enter; Recording; Enter; Remain; Enter
- Page 3 – Record Your Video; RECord; Build A Menu; DVD Menu
- Page 4 – Preview; Burn & Finalize the Disc; DVD
PRV-LX1 Quick Start
(Commands using the front panel appear in
bold
text while Function menu commands appear in
bold-italics
)
Set Up the PRV-LX1
Connect the PRV-LX1 to a source
device as shown below. For ease of
use, add a monitoring screen to each
device.
The example (right) shows the setup
for Composite Video with RCA Audio.
Select the Recording Inputs & Parameters
To record material from a source device
directly to disc, select a target. Press the
Function
button on the PRV-LX1’s front
panel. Using the arrow buttons to highlight
Drive
in the Status window. Continue using
the arrow buttons to highlight
DVD1
in the
Drive submenu and press
Enter
until an
orange box ( ) appears next to the drive.
Insert a blank DVD disc into the drive.
Note: Another option is to use the front panel to
select DVD1 as the target. If the unit is not already
set to DVD1, press the
Drive Select
button until
the indicator under DVD1 is lit.
Although the hardware is connected for
Composite, the Video Input source must also
be set to Composite. From the
Function
menu, highlight
V Input
from the Status
window then press
Enter
. Arrow right to
highlight
Composite
then press
Enter
so that
the option is marked with an orange box ( ).
PRV-LX1_QuickStart.doc
Page 1 of 5
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Using the arrow buttons on the front panel, highlight A Input then press Enter . Verify that RCA is highlighted then press Enter to select that option. An orange box ( ) appears next to RCA. Note: Settings are automatically saved to the recorder until an option is changed. Arrow left and down to hig...
Record Your Video Once the encode rates are set, record the video to the disc in DVD1. Press the Function button to exit the Function menu. Press the Record button on the front panel or the remote control to capture video from the source device as a recording session. Repeat these button combination...
Select the next action after a Title is played. If a menu is available, you can program playback to return to that menu. The other options are to continue playing through the following Title(s) or to stop playback then wait for another command. Arrow to the Preview button then press Enter to view a ...
