3Com DUA1711-1AAA01 - Manual
3Com DUA1711-1AAA01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Handling the Module; Installing the Module into a Switch; Activating the Module; Removing the Module from a Switch; NSTALLATION
- Page 5 – ECHNICAL
- Page 6 – CSA Statement; EGULATORY
- Page 7 – EGAL
This guide covers the following products:
SuperStack
®
3 Switch 4300 100BASE-FX Module
(3C17111) provides one Fast Ethernet fiber optic port
for connection to your network.
SuperStack 3 Switch 4300 100BASE-FX Dual Module
(3C17112) provides two Fast Ethernet fiber optic ports
for connection to your network.
The procedures described in this User Guide assume that
you have a single port Module. If you have a Dual
Module the procedures are the same, except that
procedures relating to the port apply to each port on the
Dual Module.
The Module conforms to the half and full duplex
implementation of the Fast Ethernet standard, IEEE
802.3u, and the port provides a 100 Mbps connection to
another 100BASE-FX device. The port can operate in
either half or full duplex mode and uses 62.5
µ
m
multimode fiber optic cable with MT-RJ duplex
connectors. The port supports the segment length
specified in IEEE 802.3u, as shown below:
LEDs
You can gather information about the status of the
Module and its packet activity using the Expansion
Module port LEDs on the front of the Switch.
I
NTRODUCTION
Fiber Size
Fiber Bandwidth
Segment Lengths Supported
62.5
µ
m
500 MHz*km
Half Duplex: 2–412 m (7–1487 ft)
Full Duplex: 2–2000 m (7–7220 ft)
Module Packet LED
Appearance
Color
Meaning
On
Green
Packets are being transmitted or received
on the Module port.
Off
No color
There are no packets being transmitted or
received on the Module port.
Module Status LED
Appearance
Color
Meaning
On
Green
The Module is installed.
Off
No color
There is no Module installed or an
unsupported Module is fitted.
SuperStack
®
3 Switch 4300 100BASE-FX Module (3C17111) and Dual
Module (3C17112) User Guide
DUA1711-1AAA01
S/N:
XXXX/
7XXXXXXXXX
3C17111 Super
Stack 3 Sw
itch 4300 100BASE-
FX
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Handling the Module The Module can be easily damaged by electrostatic discharge. To prevent damage, observe the following: Always wear an anti-static wristband connected to a suitable earth point. Do not remove the Module from its packaging until you are ready to install it into a Switch. Do n...
The following options are available for technical support: In the first instance contact your Network Supplier Check the 3Com knowledgebase at http://knowledgebase.3com.com Browse the 3Com web site on http://www.3com.com Please have your product model name, part number, hardware revision numbe...
FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Thi...
