3Com DUA1647-7AAA01 - Manual
3Com DUA1647-7AAA01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Front Panel; WARNING; AVERTISSEMENT; Priority Queuing
- Page 3 – Rear Panel Connections; Power Supply; Positioning the Switch; Rack Mounting or Free Standing; NSTALLING
- Page 4 – OUNTING
- Page 6 – FCC Statement; CSA Statement; ECHNICAL
- Page 8 – EGAL; Product Registration
The SuperStack
®
3 Baseline 8 Port Gigabit Switch is a versatile,
easy-to-use switch. It is ideal for users who want the high-speed
performance of 10/100/1000 switching but do not need
sophisticated management capabilities. The Baseline 8 Port
Gigabit Switch is shipped ready for use. No configuration is
necessary.
The Baseline 8 Port Gigabit Switch can be rack-mounted or free
standing.
The Baseline 8 Port Gigabit Switch includes:
One power cord
One mounting kit
Four standard height, self-adhesive rubber pads
The Switch is powered from the AC mains supply.
The Baseline 8 Port Gigabit Switch provides high performance
switched connections to 10 Mbps, 100 Mbps, and 1000 Mbps
hubs, switches, servers and workstations that need a dedicated
switched link. The following figure illustrates one possible
configuration. The Baseline 8 Port Gigabit Switch has 8 shielded
RJ-45, 10/100/1000 Mbps auto-negotiating ports on the front
panel. Each 10/100/1000 Mbps port automatically determines
the speed, duplex mode, and MDIX mode of the connected
equipment and provides a suitable switched connection. The
10/100 Mbps connections on these 1000BASE-T ports operate in
half or full duplex mode while the 1000 Mbps connections
operate in full duplex mode.
The Baseline 8 Port Gigabit Switch supports a maximum of 8192
MAC adddresses.
I
NTRODUCTION
Baseline 8 Port Gigabit Switch
Baseline 10/100 Switch plus Gigabit
1000Mbps
connections
Servers with
1000Mbps
connections
Baseline Dual Speed Hub
with 10/100 connection
1
5
8
1
4
SuperStack
®
3 Baseline 8 Port Gigabit Switch
10BASE-T/100BASE-TX/1000BASE-T (3C16477) User Guide
DUA1647-7AAA01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The numbers in this diagram refer to numbered sections in the text. Front Panel 1 8 RJ-45 10/100/1000 Ports WARNING : RJ-45 ports. These are shielded RJ-45 data sockets. They cannot be used as standard traditional telephone sockets, or to connect the unit to a traditional PBX or public telephone net...
The traffic prioritization feature supported by the Switch is compatible with the relevant sections of the IEEE 802.1D standard (incorporating IEEE 802.1p). 2 Activity/Link/Speed Status LEDs The top row of Status LEDs, labelled “Link/Activity,” show the link and activity status of the related ports:...
Connecting to a Network Device Follow these guidelines to connect a device to the Baseline 8 Port Gigabit Switch: Use Category 5 unshielded or shielded (screened) 100 Ohm TP cable (or Category 3 cable for a 10 Mbps connection). The maximum length of cable for each connection is100 m (328 ft). ...
