3Com 78-11069-01 - Manual

3Com 78-11069-01

3Com 78-11069-01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
Page: / 14

Table of Contents:

  • Page 2 – Configuring Cisco CallManager
  • Page 3 – Adding the DPA 7630 to Cisco CallManager; Using Auto-Registration
  • Page 4 – Adding the DPA 7630 Manually
  • Page 5 – Configuring the DPA Ports and Phones; Configuring Call Ports
  • Page 7 – Configuring Octel MWI Ports
  • Page 8 – Configuring the Virtual Port
  • Page 9 – Configuring an End-User Phone
  • Page 10 – Enabling the Message Waiting Light
  • Page 11 – Setting Up the Voice Mail Hunt Group
  • Page 12 – Configuring the Pilot Directory Number
  • Page 13 – Setting No-Answer Timeout; Configuring the Octel Systems
  • Page 14 – Setting Dialing Sequence for Message Waiting Indicator
Loading the manual

C H A P T E R

3-1

Cisco Digital PBX Adapter 7630 Administration Guide

78-11069-01

3

Preparing the Cisco CallManager and
Octel Systems

Because the DPA 7630 depends on information from the Cisco CallManager and
the Octel systems, you must verify that they are set up properly before configuring
the DPA 7630, and you must obtain some information from these systems to set
up the DPA 7630.

This guide does not contain details about configuring the Cisco CallManager and
Octel systems. Refer to the documentation provided with these systems for
installation and configuration instructions.

These sections provide details about the configuration requirements on the
Cisco CallManager and Octel systems:

•

Configuring Cisco CallManager, page 3-2

•

Configuring the Octel Systems, page 3-13

Overview of Required Tasks

Cisco CallManager recognizes the DPA 7630 as another IP telephony device. So,
to add the device to the database, you need some information from the DPA 7630.
Additionally, to set up the DPA 7630, you need information from both the
Cisco CallManager and Octel systems. Refer to Table 3-1 for an overview of the
tasks and information you need from them to configure the DPA 7630.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Configuring Cisco CallManager

Chapter 3 Preparing the Cisco CallManager and Octel Systems Configuring Cisco CallManager 3-2 Cisco Digital PBX Adapter 7630 Administration Guide 78-11069-01 Configuring Cisco CallManager The DPA requires minor changes to Cisco CallManager because when you addthe DPA 7630 to the IP network, Cisco Ca...

Page 3 - Adding the DPA 7630 to Cisco CallManager; Using Auto-Registration

3-3 Cisco Digital PBX Adapter 7630 Administration Guide 78-11069-01 Chapter 3 Preparing the Cisco CallManager and Octel Systems Configuring Cisco CallManager • Proper signaling to the message waiting indicators (MWI) on the Cisco IPPhones. Some ports on the DPA 7630 handle MWI commands from the Octe...

Page 4 - Adding the DPA 7630 Manually

Chapter 3 Preparing the Cisco CallManager and Octel Systems Configuring Cisco CallManager 3-4 Cisco Digital PBX Adapter 7630 Administration Guide 78-11069-01 Cisco CallManager only recognizes these IP phones after the Octel voice mailsystem is up and running. So, verify that the Octel system and the...

Other 3Com Models

All 3Com Other